Haier HWM110-23BS user manual Safety precautions

Page 4

Safety precautions

Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector.

When the machine is normally using, please put the power plug

at the location easily to be insert- ed and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.

If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department. Keep the pin of the power plug clean.

Do not put the machine at damp

Do not use water hotter than 50 C .

place like

the bathroom . Never

 

wash it

with water. Do not place

 

wet laundries on the control panel.

 

 

 

 

 

 

In case the washing

machine is installed

Do not wash water-proof laundries like

on ground

with

carpet , do not block the

the raincoat, bike covers etc. to avoid

ventilation

hole

with

carpet.

abnormal vibrations in spinning.

Ventilation hole at the bottom of the washing machine

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

2

Image 4
Contents Twin-tub Washing Machine Contents Meaning and description of the symbols Names of the partsSafety precautions Safety precautions Installation and adjustment How to change the direction of the drain hoses Introduction of the major function Preparation before washing Musts in washing Usage of the detergentWashing sequence Midway spinning Rinsing Rinse with stored waterSpinning Cleaning the lint filter Disposal after washingCleaning the filter frame Trouble-shooting Answer to question Phenomena ReasonSpecification Packing list