Washing sequence
Overfilling sign
Wash timer | Wash selector | Buzzer | Spin timer | |
(To set to below 2 minute, | (Standard current, | (The buzzer will ring when | (to set to below 1 minute, | |
first set to 6 minute then | strong current) | the | washing finishes) | first set to 2 minute then |
turn it back. it can increase |
|
|
| turn it back. it can increase |
the service life of the timer). |
|
|
| the service life of the timer). |
15
12
WASH TIMER
STRONG
OFF | STANDARD |
|
3
DRAIN
6
WASH SELECTOR
9
OFF
5
MAX | 4 |
|
BUZZER
OFF
1
2
3SPIN TIMER
Wash
1.Water inlet selector
(1)Set the water inlet selector at the "WASH" side. (Figure 1)
(2)Set the water level adjusting lever to needed line.
2.Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2)
Run washing program for some time to stir and dissolve the powder completely.
3.Put in the laundries. If the water quantity is insufficient, please add water.
4.Select the current.
Select the strength of the current according to the laundries. (Figure 3)
WASH
SPIN 
Figure 1
Figure 2
STRONG
STANDARD
DRAIN
WASH SELECTOR
Figure 3
OFF
5.Select the washing time
Select the washing time according to the laundries. (Figure 4)
WASH TIMER
Figure 4
6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).
STRONG
STANDARD
DRAIN
Figure 5
WASH SELECTOR
8