Safety precautions

Please plug the power plug on special		The washing machine must be positioned so that
receptacle. Be sure to use three-pins		the plug is accessible. Be sure to pull the plug off
power receptacle. Ensure that the earthing		and close the water faucet in following cases:
prong of the power receptacle is earthed		power failure, delivering the machine, setting the
reliably. Use leakage protector if possible.		machine idle or cleaning the machine. Do not plug
reliably. Use leakage protector if possible.		or pull the power plug with wet hand.
		or pull the power plug with wet hand.
	Earth

Do not bend ,extend,twist,bind by force.Do not press or nip it with weight. Keep the pin of the power plug clean,if the power plug is polluted with dust, please wipe with dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or our customer care agent.

In case the washing machine is installed on ground		Do not use water hotter than 50 .
with carpet, do not block the ventilation hole with
carpet.
	T h e v e n t i l a t i o n
Back	holes at the bottom
	holes at the bottom
	Soft object


Front
Front

Do not put the machine at damp place like			Do not wash water-proof laundries like
the bathroom. Never wash it with water. Do			the raincoat, bike covers etc. to avoid
not put wet laundries on the control panel.			abnormal vibrations in spinning.

Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more.

Trouble-shooting answer to question

(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. Do not repair it by yourself.

Phenomena		The reason	How to settle
Buzzing upon reservation starts,		The top lid is not closed	Close the top lid
Buzzing upon reservation starts,
the digitron displays "E0"
the digitron displays "E0"
No or slow drain, the digitron		Is the drain hose put down?	Put down the drain hose. Open
		Is the drain hose put down?	and close the top lid once.
			and close the top lid once.
displays "E1" , buzzing.		Is the drain hose blocked by	Clean the foreign material.
		foreign material?	Clean the foreign material.
		foreign material?	Open and close the top lid once.
			Open and close the top lid once.
Running pauses during spin,		The top cover leaves open	Close the top lid
the digitron displays "E2",		The top cover leaves open	Close the top lid
the digitron displays "E2",
buzzing

Safety switch actuates, not		Are the laundries put slantingly?	Re-order the laundries. Close the
spin, (after self-correction			top lid.Level the machine in right
spin, (after self-correction		Is the machine slanting?	position.
twice), the digitron displays		Is the machine slanting?	position.
twice), the digitron displays			Open and close the top lid once.
"E3", buzzing

No or slow water filling (not		The water tap is not open	Open the water tap.
No or slow water filling (not		The water tap is not open	Push the "Start/Pause" button.
reaching the level in 30 min),		The water inlet valve is blocked	Push the "Start/Pause" button.
reaching the level in 30 min),		The water inlet valve is blocked	Clean the water inlet valve.
the digitron displays "E4",		The water pressureis too low	Push the "Start/Pause" button.
buzzing		and the current is too small	Wait for the normal water pressure
			Before use.

The digitron displays E6.		The water level sensor is bad.	Please contact the after-sales
The digitron displays E6.			service department.
			service department.
Poor or no waterfall flow		If the nozzle is choked with	Remove the foreign bodies
Poor or no waterfall flow		foreign bodies
		foreign bodies

		Is there power failure?	Use it when the power is on.
	Not wash	Is the power plug loose?	Insert the power plug tightly.
	Not wash	Does the water level arrive at the	Affusion to the set water level.
The machine does		Does the water level arrive at the	Affusion to the set water level.
The machine does		set water level?
not act		set water level?
not act
	Not spin	Is the power plug loose?	Insert the power plug tightly.
	Not spin	Is the top lid closed?	Close the top lid
		Is the top lid closed?	Close the top lid
		Are the laundries put orderly?	Put the laundries orderly.

There's abnormal sound inside the		Is the machine slanting?	Level the machine properly.
machine		Are the laundries slanting in	Re-order the laundries.
		spinning?

		Is the jointer screw of the water	Fasten the jointer screw
The water faucet leaks		inlet hose is loose or twisted	Fasten the jointer screw
The water faucet leaks		inlet hose is loose or twisted	properly.
		awry?	properly.
		awry?

Common phenomena
Phenomena		Explanation
The spinning is intermittent when it starts.		Balance the laundries to avoid slanting.
The spinning is intermittent when it starts.		Balance the laundries to avoid slanting.

The wash procedure pauses.		The cloth sensor is detecting , it will add water
		after about 48 senconds.
Select spin program, but it does not work.		The program is setting the drain time , certain
Select spin program, but it does not work.		period is needed before it starts spinning.
		period is needed before it starts spinning.

There may be some water flowing out of the		It is the water remained performance inspection
drain hose in the first use of the machine.		by the factory.

HWM78-0528T specifications

The Haier HWM78-0528T is a sophisticated washing machine designed to meet the evolving needs of modern households. Featuring a sleek design, this model is not only aesthetically pleasing but also loaded with advanced technology that enhances its performance.

One of the standout features of the Haier HWM78-0528T is its impressive wash capacity. With a capacity of 7.8 kg, it is ideal for medium to large families, accommodating sizable laundry loads with ease. This feature ensures that users can wash more clothes in a single cycle, saving time and energy.

The washing machine is equipped with a powerful motor that delivers superior washing performance. Its high spin speed helps to extract maximum water from clothes, resulting in reduced drying time. This is particularly beneficial in areas with high humidity where drying clothes can be a challenge.

Another significant characteristic of the Haier HWM78-0528T is its multiple wash programs. With tailored settings for different fabric types, this washing machine offers flexibility and ensures optimal care for various materials. From cotton to synthetics, users can select the appropriate program to maintain the quality and longevity of their garments.

In addition to its functionality, the Haier HWM78-0528T incorporates smart technologies that enhance user convenience. The digital display allows for easy monitoring and control of wash cycles, while the child lock feature provides an added layer of safety. This is particularly important for families with young children.

The machine is designed with energy efficiency in mind. It has been awarded high ratings for its energy-saving capabilities, helping households lower their electricity bills while minimizing their carbon footprint. Eco-conscious consumers will appreciate the balance of performance and sustainability that this model offers.

Furthermore, the Haier HWM78-0528T features a self-cleaning function that helps to maintain the hygiene of the machine. This feature ensures that mold and bacteria are kept at bay, promoting a cleaner washing environment.

In summary, the Haier HWM78-0528T is a top-tier washing machine that combines capacity, innovation, and efficiency. With its advanced features, user-friendly design, and emphasis on sustainability, it is a reliable choice for those seeking a modern solution to their laundry needs. Whether faced with everyday laundry or more challenging fabric care, this model stands ready to deliver optimal performance and satisfaction.