Lint Filter
The lint filter must be used during washing.
It must be cleaned after each wash.
1 Take off the lint filter.
Install
2 Clean out the lint in the filter.
Take off
3 Install the lint filter. | Take off |
|
Install the inner cover
Install
(To prevent water spillage from tub)
1.Open the top lid of the washing machine.
2.Put the inner cover component on the outer tub cover, lining up the inner cover shaft to the installation hole of the corresponding outer tub cover shaft groove.
3.Firstly insert the inner cover shaft of one side into the corresponding outer tub cover shaft groove, then push the other inner cover shaft into the corresponding outer tub cover shaft groove. Please install in the designated position to guarantee there is no abnormal sound in opening and closing of the inner cover, and the operation shall be smooth. Do not remove the inner cover component after washing.
Outer tub cover | Section I enlarging |
Outer tub cover shaft groove
Inner cover shaft 
Inner cover
Push
9