Washer load may need to be
Coins, loose change, buttons or other heavy objects could make noise(read Operating
Squealing sound: Due to overloaded wash tub.
Vibration Noise: Due to not leveling washer properly on the floor and uneven distribution of clothes in the tub.
Problems with clothes:
Clothes are too wrinkled: this is due to improper sorting, overloading and washing in too hot water repeatedly.Avoid overloading and resort your load. Do not mix heavy clothes such as work clothes with light clothes such as blouses, light shirts and delicate items. You may need to wash in warm or cold water
Have soap residue: detergent may not be dissolving in water. Check water temperature or you need to add detergent as wash tub is being filled with water.
Spots or stains on your clothes: this is due to incorrect use of fabric softener. You may need to read proper instructions on the container and follow proper directions when using the softener.
Clothes are grayed or yellowed: this is due to not pouring enough detergent for large loads. You may have to add more detergent to the load.
Clothes are ripped & have holes/excessive wear & tear: this is due to sharp objects such as pins and belt buckles left in pockets. You will need to remove small loose sharp objects. Fasten belts, zippers, metal snaps etc. Check if you are using undiluted bleach. Never add undiluted bleach to wash.
Note: |
|
Trouble Codes | Reason |
E0 | Top lid not closed during delay start sequence |
E1 | Blockage of drain hose |
E2 | Top lid not closed during wash operation |
E4 | The water inlet time exceeds the preset time |
| (30minutes) |
E7 | The communication is bad |
F2 | The protection of water overflow |
13