Haier HWM75-0528 A user manual Disposal after washing

Page 5

Disposal after washing

After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.

Please first pull off the power plug from the receptacle before cleaning.

The lint filter must be used during washing.

It must be cleaned in time after each using.

1.Take off the lint filter

Put hand at the indicated position.

Push down to take it off. ( See to Figure 1)

2. Clean the lint

Figure 1

Put it in water and clean while it is

 

still wet.(See to Figure 2)

 

3. Install the lint filter

 

After cleaning, insert the bottom

 

of the lint filter ( marked with

Figure 2

"down side") into the filter frame ,

 

then push the upper part of the

 

filter in ( marked with " up side ").

 

(See to Figure 3)

Figure 3

 

Safety precautions

Do not stretch hands into the working machine.

Do not decompose, repair or alter the machine

It is dangerous even if the rotation is slow.

by yourself.

Take special care of the children.

 

Do not put any hot or heavy items (such as the kettle

Do not wash laundries with volatile materials

with hot water) on the washing machine

(such as thinner, petrol etc.).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Benzene

 

 

 

 

 

 

 

 

 

 

 

 

 

The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol,

alcoholetc.

The appliance is not instruct for use of young

Keep the machine away from direct sunlight and

children of infirm persons without supervision.

heat source like the heater.

Young children should be supervised to ensure

 

that they do not play with the appliance.

 

hol

 

Alco

Petrol

 

Thinner

 

 

 

 

 

 

 

1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).

2.Do not store water in the washing machine for a long period. Drain the water completely after each using. 3.Be sure to pull off the power plug before maintenance.

4.Hang up the power cord and drain hose.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.

Image 5
Contents Fully Automatic Washing Machine Contents Names of the parts Meaning and description of the symbolsPhenomena Reason How to settle Safety precautionsDisposal after washing Adjust the Installation position Installation and adjustmentPush the Water Level button,select suitable water level Push the Start/Pause buttonProgram select Usage the drain hoseReserve,Process,remain time digitron Install the water inlet hoseConfirm the water faucet Connection between the water inlet hose and the washer Indicator mode and meaningDescription of operation button Dismantle the water inlet hosePay attention to followings before washing the laundries How to use the whitenerHow to use washing powder