Preparation before washing

Connection between the water inlet hose and the washer

1.Connect the water inlet hose.

1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately.

2.Put the nut of the water inlet hose on the valve jointer.

3.Fasten the nut. Swing it gently to confirm if it's suitable.

jointer of the water inlet valve

nut of the water inlet hose

water absorption cushion.

2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

3.Put down the drain hose.

The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.

Connection between the jointer of the water inlet hose and the water inlet hose

1.Push down the slider. Insert the water inlet hose into the jointer.		the jointer of the
		the jointer of the
	Locking level	water inlet hose
	Locking level	Slider
2.Hang the lock lever to the jointer. Release the slider till a click		Slider
sound is heard.

4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally.

Pay attention to followings before washing the laundries

Check the connection between the jointer of the water inlet hose and the water faucet

Confirm if there's special requirement for the laundries.

Clear the pocket. Take out the coins , sand, hairpins etc.

Fasten the buttons and zippers.

The quantity of the laundries shall not exceed the rated

When the pulsator is running ,the buttons of the laundries may cause

1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain.

4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position.

Dismantle the water inlet hose

value. The big laundries like the jeans shall be put in loosely.

noise. For the sake of discretion ,please put the laundries with buttons into other laundries.

1.Close the water faucet.

2.Press the locking lever. Push down the slider. Then pull of the water inlet hose.

If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw.

Locking level

Slider

a. Check if the laundries are applicable for washing with machine. b. Divide the laundries with unfast color from other laundries.

c. Put those laundries difficult to absorb water into water with hand.

d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil, please apply detergent in advance, which can make it easier to remove the soil.

e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.

f.Do not put those laundries polluted by chemicals directly into the washing machine.

g.For those small laundries and those may get twisting or worn, and woollen/fur laundries, please put them into mesh bag for washing.