JVC XL-FZ700 Compu Link remote control system, Automatic source selection, Synchronized recording

Page 15

General informations

COMPU LINK remote control system

The COMPU LINK Remote Control System controls relative operations between components automatically and facilitates various operations.

This is a system originated and developed by JVC for facilitating various system operations. The following is a brief explanation of this system:

Automatic source selection

When the supplied COMPU LINK cord is utilized to connect this unit to others equipped with COMPU LINK jacks, switching-in of each system component can be performed with a single touch on the source selector button located on a JVC amplifier or receiver.

When selection is carried out in this manner, the corresponding unit will automatically start operation.

Upon pressing of the play button, the source selector of the amplifier or receiver changes automatically. When a new unit is switched in, the previously selected component stops operation within five seconds.

Synchronized recording

Synchronized recording refers to the process in which a JVC cassette deck starts recording, synchronized with this unit. Synchronized recording is carried out as follows:

1Set the cassette deck to the recording pause mode in accordance with its instructions.

2To record only certain tracks or discs, program the tracks in any order, as desired.

3Press the 3 PLAY button on the front panel of this unit. The cassette deck automatically starts recording, synchronized with this unit.

NOTES

•Synchronized recording stops automatically when this unit stops playback.

•To cancel synchronized recording, press the stop button of this unit or the cassette deck.

•To properly operate the synchronized recording, the buttons/controls other than % STANDBY/ON, 7 STOP and 0 OPEN/

CLOSE buttons do not function.

•If the recording pause mode is set on the cassette deck by pressing the 8 PAUSE button after pressing the REC and 3 PLAY buttons simultaneously, synchronized recording is not possible. For details, refer to the instructions for the cassette deck.

Automatic power on/off function

This function is to control the power on/off of the receiver/amplifier or this unit respectively as the following.

•When this unit enters playback mode, the power of the receiver or amplifier is turned on.

•When the source selector of the receiver/amplifier is set to CD function mode, the power of this unit is turned on.

NOTES

•Abnormal operation may result if the power supply of the component(s) is interrupted. If this happens, you must start over again.

•Ensure that the COMPU LINK jacks of the each component are connected with the supplied COMPU LINK cord. Also, be sure to fully read the instructions for each component.

•When the power of the amplifier or receiver is switched off, this unit is also turned off automatically.

General

informations

 

 

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 203$&7,6&$8720$7,&&+$1*5 Mises en garde, précautions et indications diverses Table of Contents Precautions About this manual Main unit Names of buttonsOPEN/CLOSE button Remote control unitDisplay window Program button Repeat button Random button Disc 1-7 buttonsSupplying the power Installing the unitConnecting to the Analog Output Jacks Connecting to the Digital Output JackCompu Link connection To install the batteries in the remote control unitBattery replacement Connecting the Compu Link cordInserting and removing discs Turning on the power of this unitRemote control operation Basic functions for disc playbackPlaying a disc Stopping playbackSearching for a desired section Locating a point to start playbackSkipping to a desired disc during playback Disc Skip Changing to a desired disc during playback DiscUnit searches for the selected track and playback Playing tracks in a order of disc/track numberPlaying tracks in a desired order Program Play Repeating all the tracks of a disc To cancel repeat modePlaying tracks in a random order Random Play Playing repeatedly Repeat PlaySynchronized recording Compu Link remote control systemAutomatic power on/off function Automatic source selectionEven on label side How to handle CDsMaintenance of discs Care and handlingGeneral TroubleshootingSpecifications AccessoriesToll Free 1 800 Do not service the television yourselfLimited Warranty JVC 0202AOMCREJEM 785&+$1*85&203$&7,6&6 Mises en garde, précautions et indications diverses Table of Contents Introduction Disc Remote control unit Digital Compu Link Output Synchro OUT Optical Right Left OUT Output Optical Right Left Basic operations Stopping playback Using the track buttons Playing tracks in a order of disc/track number Order Program Play Playing tracks in a desiredPlaying tracks in a random order Random Play General informations Care and handling Troubleshooting Specifications EN, FR JVC 0202AOMCREJEM

XL-FZ700 specifications

The JVC XL-FZ700 is a high-performance CD player that emerged in the late 1990s, renowned for its advanced features and exceptional sound quality. Designed with audiophiles in mind, the XL-FZ700 is part of JVC's esteemed lineup, reflecting the brand's commitment to audio innovation.

One of the primary features of the JVC XL-FZ700 is its ability to play various disc formats. While it primarily supports standard CDs, it also accommodates CD-R and CD-RW formats, making it a versatile choice for users who wish to enjoy their own recorded music. The player capabilities ensure compatibility with a wide range of music libraries, allowing audiophiles to experience their collections without limitations.

At the heart of the XL-FZ700 lies the JVC’s renowned digital-to-analog converter (DAC) technology, which enhances the audio fidelity delivered to speakers. The DAC plays a crucial role in how digital signals are translated into analog sound waves, and JVC's commitment to quality in this area provides listeners with clear, immersive audio reproduction. The result is a listening experience characterized by rich detail and an extended frequency response, making every note and lyric come alive.

Another impressive feature of the XL-FZ700 is its advanced anti-vibration chassis design. This engineering choice minimizes vibration, a common issue that can adversely affect sound quality, especially during playback. The sturdy construction of the player also reduces resonance, ensuring that the audio remains unblemished by external influences.

The user interface of the JVC XL-FZ700 is intuitive, featuring a well-organized remote control that allows users to navigate their music selection easily. The inclusion of programmable playback options is a bonus for users who wish to create custom playlists directly from the remote, enhancing the convenience of the listening experience.

Additionally, the JVC XL-FZ700 includes a built-in display that provides essential information about the current track, playback mode, and time remaining, making it easy for users to follow along with their music.

In conclusion, the JVC XL-FZ700 is a remarkable CD player that stands out for its sound quality, versatility, and user-friendly features. With its advanced DAC technology, robust construction, and support for multiple disc formats, it remains a respected choice among music enthusiasts seeking a high-quality audio experience. Whether you are rediscovering an old favorite or exploring new sounds, the JVC XL-FZ700 promises to deliver a listening experience that is rich and fulfilling.
Top Page Image Contents