JVC XL-FZ700 manual Stopping playback, Playing a disc

Page 10

Basic operations

Disc to be played back

The disc set in the front-left disc tray when the carousel closes is loaded for playback. If no disc is set in the front- left disc tray when the carousel closed, the unit rotates the carousel clockwise until it finds a disc. If no disc is set at all in the carousel, “NO DISC” will appear on the display.

Playback operation before closing the carousel

By pressing the 3 PLAY button on the main unit or the 3 button on the remote control unit, the carousel closes and the disc to be played back firstly will be played back.

By pressing the DISC (1-7) buttons on the main unit or the remote control unit, the specified disc will be played back.

To stop playback temporarily

Press the 8 PAUSE button on the main unit or the 8 button on the remote control unit. The 8 indicator lights on the display and playback stops temporarily.

To resume playback, press the 3 PLAY button on the main unit or the 3 button on the remote control unit again.

Stopping playback

Press the 7 STOP button on the main unit or the 7 button on the remote control unit.

Main unit

Remote control unit

STOP

Basic operations

Playing a disc

Playing a disc

Press the 3 PLAY button on the main unit or the 3 button on the remote control unit.

The 3 indicator lights on the display and playback starts.

Main unit

Remote control unit

PLAY

 

1235674

DISCTRACKTOTALTIME

17890234

5162

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Total

 

Playback time

 

 

 

 

 

 

 

 

 

 

 

 

1235674

RANDOMPROGRAMTotal DISCtrack numberTRACK

TIME

STEP 1317148902153164

17511862

 

A few seconds later

1

2

3

DISC TRACK

 

TIME

STEP

1

2

3

4

5

6

4

 

 

 

7

8

9

10

11

12

 

5

6

7

 

 

 

 

13

14

15

16

17

18

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Playback elapsed time

DISC number being played back

NOTE

All available discs are sequentially played back. Playback will continue until you stop it. (See “Stopping playback” on this page.)

Playing a desired disc

Press a desired DISC (1-7) button.

The 3 indicator lights on the display and playback starts.

Main unit

Remote control unit

 

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7

DISC 1

DISC 2

DISC 3

DISC 4

 

DISC 5

DISC 6

DISC 7

 

The DISC (1-7) button without the circle in the DISC indicator does not work.

About the DISC (1-7) indicators

Each DISC indicator shows the current status of the corresponding tray as follows:

The circle of the DISC indicator will light if a disc is set in the corresponding disc tray. (The numbers 1-7 are always lit.)

The circle is unlit if no disc is set in the corresponding disc tray.

NOTES

Inserted disc is detected when the carousel is turned. So, until then, the unit cannot know the disc presence status of the disc tray. For such disc trays, the unit temporarily turns on the corresponding indicators.

During program play mode, the number shows the presence of disc and the circle shows the disc being programed.

During random play mode, the number shows the presence of disc and the circle shows the disc being played back for random play.

About the music calendar

When a disc to be played back is read, the contents (track numbers) of the disc appear on the music calendar. As the track is finished to play back or skipped, the track number will disappear from the music calendar.

NOTE

During program play mode, only the programed tracks appear on the music calendar.

8

Image 10
Contents 203$&7,6&$8720$7,&&+$1*5 Mises en garde, précautions et indications diverses Table of Contents Precautions About this manual Names of buttons Main unitProgram button Repeat button Random button Disc 1-7 buttons Remote control unitDisplay window OPEN/CLOSE buttonConnecting to the Digital Output Jack Installing the unitConnecting to the Analog Output Jacks Supplying the powerConnecting the Compu Link cord To install the batteries in the remote control unitBattery replacement Compu Link connectionBasic functions for disc playback Turning on the power of this unitRemote control operation Inserting and removing discsStopping playback Playing a discChanging to a desired disc during playback Disc Locating a point to start playbackSkipping to a desired disc during playback Disc Skip Searching for a desired sectionPlaying tracks in a order of disc/track number Unit searches for the selected track and playbackPlaying tracks in a desired order Program Play Playing repeatedly Repeat Play To cancel repeat modePlaying tracks in a random order Random Play Repeating all the tracks of a discAutomatic source selection Compu Link remote control systemAutomatic power on/off function Synchronized recordingCare and handling How to handle CDsMaintenance of discs Even on label sideAccessories TroubleshootingSpecifications GeneralDo not service the television yourself Toll Free 1 800Limited Warranty JVC 0202AOMCREJEM 785&+$1*85&203$&7,6&6 Mises en garde, précautions et indications diverses Table of Contents Introduction Disc Remote control unit Digital Compu Link Output Synchro OUT Optical Right Left OUT Output Optical Right Left Basic operations Stopping playback Using the track buttons Playing tracks in a order of disc/track number Playing tracks in a desired Order Program PlayPlaying tracks in a random order Random Play General informations Care and handling Troubleshooting Specifications EN, FR JVC 0202AOMCREJEM

XL-FZ700 specifications

The JVC XL-FZ700 is a high-performance CD player that emerged in the late 1990s, renowned for its advanced features and exceptional sound quality. Designed with audiophiles in mind, the XL-FZ700 is part of JVC's esteemed lineup, reflecting the brand's commitment to audio innovation.

One of the primary features of the JVC XL-FZ700 is its ability to play various disc formats. While it primarily supports standard CDs, it also accommodates CD-R and CD-RW formats, making it a versatile choice for users who wish to enjoy their own recorded music. The player capabilities ensure compatibility with a wide range of music libraries, allowing audiophiles to experience their collections without limitations.

At the heart of the XL-FZ700 lies the JVC’s renowned digital-to-analog converter (DAC) technology, which enhances the audio fidelity delivered to speakers. The DAC plays a crucial role in how digital signals are translated into analog sound waves, and JVC's commitment to quality in this area provides listeners with clear, immersive audio reproduction. The result is a listening experience characterized by rich detail and an extended frequency response, making every note and lyric come alive.

Another impressive feature of the XL-FZ700 is its advanced anti-vibration chassis design. This engineering choice minimizes vibration, a common issue that can adversely affect sound quality, especially during playback. The sturdy construction of the player also reduces resonance, ensuring that the audio remains unblemished by external influences.

The user interface of the JVC XL-FZ700 is intuitive, featuring a well-organized remote control that allows users to navigate their music selection easily. The inclusion of programmable playback options is a bonus for users who wish to create custom playlists directly from the remote, enhancing the convenience of the listening experience.

Additionally, the JVC XL-FZ700 includes a built-in display that provides essential information about the current track, playback mode, and time remaining, making it easy for users to follow along with their music.

In conclusion, the JVC XL-FZ700 is a remarkable CD player that stands out for its sound quality, versatility, and user-friendly features. With its advanced DAC technology, robust construction, and support for multiple disc formats, it remains a respected choice among music enthusiasts seeking a high-quality audio experience. Whether you are rediscovering an old favorite or exploring new sounds, the JVC XL-FZ700 promises to deliver a listening experience that is rich and fulfilling.