JVC XL-FZ700 manual Basic functions for disc playback, Turning on the power of this unit

Page 9

Basic operations

Basic functions for disc playback

Turning on the power of this unit

Press the % STANDBY/ON button to turn on this unit. The STANDBY indicator is turned off and the display is turned on.

Main unit

Remote control unit

STANDBY

STANDBY/ON

STANDBY/ON

Press again to turn off the power and activate the standby mode. The STANDBY indicator is lit and the display goes out.

The power is automatically turned on also by;

Pressing the 0 OPEN/CLOSE button on the main unit or the OPEN/CLOSE button on the remote control unit. The carousel will be opened.

Pressing the 3 PLAY button on the main unit or the 3 button on the remote control unit.

The disc that was lastly selected will be played back. If no disc is set in all the disc trays, “NO DISC” will appear.

Pressing the DISC (1-7) button on the main unit or the remote control unit.

The corresponding disc will be played back.

NOTES

A small amount of power (3.0 W) is consumed even in the standby mode.

To turn off the power completely, disconnect the power cord from the wall outlet.

Remote control operation

Point the remote control unit towards the remote sensor and operate it steadily and carefully. The remote control unit can be used within a range of about 7 m (23 feet) from the remote sensor, and at angles of up to about 30 degrees.

Inserting and removing discs

Up to 7 discs can be set on the disc tray carousel.

1 Open the carousel by pressing the 0 OPEN/ CLOSE button on the main unit or the OPEN/ CLOSE button on the remote control unit.

You can access to two of seven trays.

Main unitRemote control unit

 

 

 

OPEN/

OPEN/CLOSE

CLOSE

 

 

 

 

4

3

The number written on the carousel corresponds to the disc number shown on the display

NOTE

From the second time on, the carousel opens with the previously played disc on the left-front tray.

2 Press the EXCHANGE/DISC SKIP button on

the main unit or the DISC SKIP button on the

 

remote control unit to select accessible disc

operations

trays if required.

 

 

 

 

 

 

 

Main unit

Remote control unit

Basic

 

 

 

 

EXCHANGE/DISC SKIP

 

DISC SKIP

 

 

 

 

 

 

 

Each time the button is pressed, the carousel rotates clockwise by an amount for accessing the next two disc trays.

 

6

Label

5

side up

 

3 Place one or two discs in the disc tray(s) with the label side up.

To insert an 8-cm disc, place it in the inner recess.

CAUTION

When loading discs in the disc tray, be sure to put the discs according to the recess. Otherwise, the discs will be damaged when the carousel is closed, and cannot be removed from the unit.

4 Repeat steps 2 and 3 to set more discs onto other disc trays.

5 Press the 0 OPEN/CLOSE button on the main unit or the OPEN/CLOSE button on the remote control unit to close the carousel.

7

Image 9
Contents 203$&7,6&$8720$7,&&+$1*5 Mises en garde, précautions et indications diverses Table of Contents Precautions About this manual Main unit Names of buttonsDisplay window Remote control unitProgram button Repeat button Random button Disc 1-7 buttons OPEN/CLOSE buttonConnecting to the Analog Output Jacks Installing the unitConnecting to the Digital Output Jack Supplying the powerBattery replacement To install the batteries in the remote control unitConnecting the Compu Link cord Compu Link connectionRemote control operation Turning on the power of this unitBasic functions for disc playback Inserting and removing discsPlaying a disc Stopping playbackSkipping to a desired disc during playback Disc Skip Locating a point to start playbackChanging to a desired disc during playback Disc Searching for a desired sectionUnit searches for the selected track and playback Playing tracks in a order of disc/track numberPlaying tracks in a desired order Program Play Playing tracks in a random order Random Play To cancel repeat modePlaying repeatedly Repeat Play Repeating all the tracks of a discAutomatic power on/off function Compu Link remote control systemAutomatic source selection Synchronized recordingMaintenance of discs How to handle CDsCare and handling Even on label sideSpecifications TroubleshootingAccessories GeneralToll Free 1 800 Do not service the television yourselfLimited Warranty JVC 0202AOMCREJEM 785&+$1*85&203$&7,6&6 Mises en garde, précautions et indications diverses Table of Contents Introduction Disc Remote control unit Digital Compu Link Output Synchro OUT Optical Right Left OUT Output Optical Right Left Basic operations Stopping playback Using the track buttons Playing tracks in a order of disc/track number Order Program Play Playing tracks in a desiredPlaying tracks in a random order Random Play General informations Care and handling Troubleshooting Specifications EN, FR JVC 0202AOMCREJEM

XL-FZ700 specifications

The JVC XL-FZ700 is a high-performance CD player that emerged in the late 1990s, renowned for its advanced features and exceptional sound quality. Designed with audiophiles in mind, the XL-FZ700 is part of JVC's esteemed lineup, reflecting the brand's commitment to audio innovation.

One of the primary features of the JVC XL-FZ700 is its ability to play various disc formats. While it primarily supports standard CDs, it also accommodates CD-R and CD-RW formats, making it a versatile choice for users who wish to enjoy their own recorded music. The player capabilities ensure compatibility with a wide range of music libraries, allowing audiophiles to experience their collections without limitations.

At the heart of the XL-FZ700 lies the JVC’s renowned digital-to-analog converter (DAC) technology, which enhances the audio fidelity delivered to speakers. The DAC plays a crucial role in how digital signals are translated into analog sound waves, and JVC's commitment to quality in this area provides listeners with clear, immersive audio reproduction. The result is a listening experience characterized by rich detail and an extended frequency response, making every note and lyric come alive.

Another impressive feature of the XL-FZ700 is its advanced anti-vibration chassis design. This engineering choice minimizes vibration, a common issue that can adversely affect sound quality, especially during playback. The sturdy construction of the player also reduces resonance, ensuring that the audio remains unblemished by external influences.

The user interface of the JVC XL-FZ700 is intuitive, featuring a well-organized remote control that allows users to navigate their music selection easily. The inclusion of programmable playback options is a bonus for users who wish to create custom playlists directly from the remote, enhancing the convenience of the listening experience.

Additionally, the JVC XL-FZ700 includes a built-in display that provides essential information about the current track, playback mode, and time remaining, making it easy for users to follow along with their music.

In conclusion, the JVC XL-FZ700 is a remarkable CD player that stands out for its sound quality, versatility, and user-friendly features. With its advanced DAC technology, robust construction, and support for multiple disc formats, it remains a respected choice among music enthusiasts seeking a high-quality audio experience. Whether you are rediscovering an old favorite or exploring new sounds, the JVC XL-FZ700 promises to deliver a listening experience that is rich and fulfilling.