Humminbird 700 manual Lower Range, Side Beam Range, Chart Speed

Page 27

www..reelschel531427-1 C - 767_Man_mEng.aticqxd 10/25/2005..com10:29 AM Page 52

Lower Range

Lower Range sets the deepest depth range that will be displayed. Automatic is the default setting. When in automatic mode, the lower range will be adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range into Manual mode. Use both Upper and Lower Range together to view a specific depth range manually when looking for fish or bottom structure. M will be displayed in the lower right

corner of the screen when you start manually adjusting the Lower Range to indicate that you are in Manual mode.

For example, if you are fishing in 60 feet of water but are only interested in the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display will show the 0 to 30 foot range, allowing you to see a more detailed view than you would see if the display went all the way to the bottom.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range regardless of the manual settings entered.

To adjust the Lower Range:

1.Highlight Lower Range on the Sonar X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 1500 feet, 3 to 500 meters [International Models only], Default = AUTO)

Side Beam Range

(WideSide® transducer: WideSide® view only)

Side Beam Range sets the deepest range that will be displayed in the WideSide® View. The range must be set manually to keep the bottom visible on the display. If the Side Beam Range is set too deep for current depth conditions the sonar information will become compressed on the display and valuable detail will be lost. A WideSide® transducer must be connected to the 700 Series™ Fishing System. Side Beam Range menu choice is available when Transducer Select is set to WideSide® (see Sonar Menu Tab: Transducer Select) and can only be accessed from the WideSide® view.

NOTE: The Side Beam Range requires the purchase of the WideSide® transducer. You can visit our website at www.humminbird.com to order this accessory online or contact our Customer Resource Center at 1-800-633-1468.

To adjust the Side Beam Range:

1.Make sure you are in WideSide® Transducer Mode and that a WideSide® transducer is connected, then highlight Side Beam Range on the Sonar X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Side Beam Range setting. (6 - 160 feet, or 2 - 40 meters [International Models only], Default = 160 feet [40 meters])

Chart Speed

Chart Speed determines the speed at which the sonar information moves across the display, and consequently the amount of detail shown. A faster speed shows more information in the Sonar Views and is preferred by most anglers; however, the sonar information moves across the display quickly. A slower speed keeps the information on the display longer, but the bottom and fish details become compressed and may be difficult to interpret. Regardless of the Chart Speed setting, the RTS® Window will update at the maximum rate possible for the depth conditions. Adjust Chart Speed to your personal preference.

To adjust the Chart Speed:

1.Highlight Chart Speed on the Sonar X-Press™ menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Chart Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 5)

43

44

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Atic Thank You Table of ContentsNavigation Menu Tab Views Menu Tab Accessories Menu Tab How Sonar Works Peak to Peak measures power output at the highest pointsWith optional-purchase QuadraBeamTM transducer DualBeam Plus SonarQuadraBeam Sonar WideSide SonarSoftware Updates How GPS and Cartography WorkMulti-Media Card MMC/SD Slot Bait Ball Hard Bottom Rocky Bottom 200 KHzWith F f e r e n tAverage speed reading Distance distanceTraveled with Average SpeedSonar views Zoom View Chart View 200/83 kHz Split Sonar ViewViews Sonar ViewBottom Presentation Understanding Sonar HistoryReal Time Sonar RTS Window Freeze FrameSonar Zoom View Sonar Zoom ViewBig Digits View 200/83 kHz Split Sonar ViewCircular Flasher View Screen Snapshot ViewSide Beam View Side Beam ViewBird’s Eye View WideSide ViewBird’s Eye View Chart View Combo ViewView Orientation Waypoints, Routes and Tracks Viewing CartographyNavigate to a Waypoint or Position Save, Edit, or Delete a WaypointPress menu Save, Edit or Delete a RouteSave or Clear a Current Track Add a Waypoint Target or Trolling GridView Key POWER/LIGHT KeyEdit, Delete or Hide Saved Tracks Key FunctionsGoto Key Accessory BusWAY Cursor Control Key Mark KeyPowering Up the Unit Menu SystemTitle Screen Start-Up Options Menu Normal OperationSimulator Self Test GPS Diagnostic ViewAccessory Test System StatusSonar views only To adjust the SideSonar X-PressTMMenu SideUpper Range To adjust the SensitivityTo adjust the Upper Range SensitivityChart Speed Lower RangeSide Beam Range Bottom Lock Cancel NavigationBottom View Bottom RangeOnly with an active cursor on a waypoint Navigation X-PressTMMenuWaypoint Name Navigation views onlySave Current Route Cursor to WaypointSave Current Track Clear Current TrackRemove Target Remove GridSonar Window Sonar Menu Tab Screen Snapshot X-Press TM MenuDelete Image Delete All ImagesTo turn Fish ID+ on or off Beam SelectFish ID+TM To use Beam SelectKHz Balance Fish ID SensitivityZoom Width KHz SensitivityDepth Lines To change the 455 kHz Balance settingTo change the Depth Lines setting WideSide SensitivitySurface Clutter Noise FilterMax Depth Navigation Menu Tab To change the Water Type settingWater Type Transducer SelectCurrent Track Saved TracksWaypoints Grid Rotation Chart OrientationRoutes North ReferenceExport All Nav Data Track Min DistanceMap Datum Course Projection LineTo change the Map Borders setting Chart Menu TabChart Detail Level To change the Chart Detail Level settingSet Map Offset Lat/Lon GridSpot Soundings Set Simulation PositionTo change the Depth Alarm setting Alarms Menu TabDepth Alarm Fish ID AlarmArrival Alarm Low Battery AlarmTemp Alarm Off Course AlarmDrift Alarm Setup Menu TabAlarm Tone Units Distance User ModeUnits Depth Units TempAdvanced, Sonar view only Triplog ResetRestore Defaults Select ReadoutsAdvanced, with Temp/Speed only Depth OffsetTemp Offset Speed CalibrationNmea Output Position FormatTime Format Date FormatTo Change the View Status of Any View Accessories Menu TabUsing Screen Snapshot Views Menu TabTroubleshooting To make a screen snapshot Screen Snapshot must be enabledTo view screen snapshots Finding the Cause of Noise Display ProblemsSpecifications Series Fishing System AccessoriesSonar Terms Glossary100 102 Receiver See Transmitter104 GPS & Navigation Terms 108 Magnetic NorthContact Humminbird
Top Page Image Contents