| Controlling Multiple Set | |
|
|
|
Transmission / Receiving Protocol
11.Sharpness(Command : k) (Video Timing only) ► To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr] Data Min : 00H to Max : 64H
(Hexadecimal code)
*Refer to 'Real data mapping' page A7.
Acknowledgement
| [k][ ][Set ID][ ][OK][Data][x] |
Data | Min : 00H to Max : 64H |
12. OSD Select(Command : l)
►To control OSD on/off to the set. Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off 1 : OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD Off | 1 : OSD On |
13.Remote Lock /Key Lock (Command : m) ► To control Remote Lock on/off to the set.
This function, when controlling
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Off 1 : On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : Off | 1 : On |