Troubleshooting
Equipment Setup Analysis Notes
•Make sure all connectors and connections are tight and secure on user device,
•Check to assure user device,
•Audio and Video can be from different sources. Default is TV tuner Audio and Video, if no other audio/video source is connected.
•Audio source must be viable. The audio output from the customer’s device must be present when connect- ed to be heard at the TV.
Test Procedures
•Test and connect only one user device to determine if RJP is providing audio/video to TV.
•Test user device on another RJP (perhaps located in a different room) to determine if user device is com- patible with RJP.
•On LCD or Plasma TV, Installer menu items:
040 Auto Camport needs to be disabled by setting it to 000. 093 RJP Available needs to be set to 001 to enable RJP mode.
Following are some possible solutions to problems:
Problem | Possible Cause(s) Check RJP, User Device and |
No Power | • Power not connected? |
|
|
No Audio | • Have all audio connections been made? |
| • Audio output available? |
| • Volume level turned up? |
| • Sound muted? |
| • TV setup correct for RJP? |
| (Installer menu item 040 must be set to 000 and item 093 set to 001.) |
| • Try another RJP. |
| • Priority level? (Disconnect other devices.) |
| • Connections made after 040 and 093 menu items set. |
| (Make connections before adjusting menu items 040 and 093.) |
|
|
No Video | • Video output available? |
| • All video cables connected? |
| • TV setup correct for RJP? |
| (Installer menu item 040 must be set to 000 and item 093 set to 001.) |
| • Priority level? (Disconnect other devices.) |
|
|
Poor Video | • Check connections. (Video |
1 3 |