Humminbird ID 600 manual Depth Range, Fish ID

Page 27

Depth Range

7.Setting Depth Range; Factory setting; On (Automatic)

When you turn the SeaScope ID600 on it finds the bottom, sets the ideal depth range, and automatically adjusts the depth range (to as much as 480 ft) as the depth changes. In this “Auto Depth Range”mode, the bottom is blacked-in for easy-to-understand readings.

If you prefer, you can turn Auto Depth Range off. Select RANGE, press ON- OFF, and adjust the Depth Range with the UP or Down arrow key. You can set Depth Range up to 600ft.

In this “Manual Depth Range” mode, the bottom is not blacked in. This lets you see a “second return,” which is preferred by some fishermen because the width of the second echo can indicate bottom hardness.

Fish ID

8.Selecting Fish ID;

Factory setting; On (Automatic)

When you turn the SeaScope ID600 on, the unit automatically sets Fish ID to the On position. To turn the ID feature off, and display fish with pixels instead of the ID icons,

Image 27
Contents Page Accessories Installation OverviewParts Supplied Determining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesStep Five Adjust the Running Position of the Transducer Step Four Mount the Transducer to the TransomConfirm the pivot angle has not changed Page Step Six Route the Cable Inside the Hull Installation Step One Determine the Mounting LocationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Control Head Installation Step One Determine Where to MountStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Gimbal Mount Installation Installing the SeaScope ID600Testing the Installation Using the SeaScope ID600 Using the Built-In SimulatorOperating the SeaScope ID600 Sensitivity Factory setting +0/FEETFish Alarm Bottom AlarmBottom Lock ZoomDisplay Speed Fish ID Depth Range