Humminbird Model Matrix 87 Remove Grid, Sonar Window, Sonar Menu Tab, Only if a Grid is Active

Page 26

M87_Man_531352-1_A.qxd 12/9/2004 3:28 PM Page 50

Remove Grid

(Only if a Grid is Active)

Remove Grid removes the waypoint grid from the display. This menu choice will only appear when a grid has already been applied to a waypoint.

To Remove a Grid:

1.Highlight Remove Grid on the Navigation X-Press™ Menu.

2.Use the RIGHT 4-WAY Cursor Control key to remove the grid.

Sonar Window

(Combo View Only)

Sonar Window sets the size of the Sonar Window in the Combo View. Sonar Window can only be accessed from the Combo View.

To Set the Size of the Sonar Window in the Combo View:

1.Highlight Sonar Window on the Navigation X-Press™ Menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to adjust the size of the sonar window. (Wide, Medium, Narrow, Default = Medium)

Sonar Menu Tab

Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor key to select the Sonar tab.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode or what transducer is currently selected.

Sonar Menu

44

45

 

Image 26
Contents Matrix 87c Operations Manual Table of Contents Thank YouSonar X-Press Menu Sonar Views Only Alarms Menu TabSetup Menu Tab Navigation X-Press Menu Navigation Views OnlyQuadraBeam Sonar How Sonar WorksDualBeam Plus Sonar Multi-Media Card MMC WideSide SonarHow GPS and Cartography Work With Optional-Purchase WideSide TransducerWhat’s On the Sonar Display KHz Blue Fish SymbolKHz Orange Fish Symbol High Sonar Intensity Return Bait BallSonar views ViewsSonar View Bottom Presentation Understanding Sonar HistoryReal Time Sonar RTS Window Sonar Zoom View 200/83 kHz Split Sonar ViewBig Digits View Big Digits ViewSide Beam View Side Beam ViewBird’s Eye View WideSide ViewBird’s Eye View Combo View Chart ViewChart View with Active Cursor View OrientationWaypoints, Routes and Tracks Viewing CartographyIntroduction to Navigation Waypoints, Routes and TracksSave, Edit, or Delete a Waypoint Navigate to a Waypoint or PositionAdd a Waypoint Target or Trolling Grid Chart View with TargetChart View with Grid Edit, Delete or Hide Saved Tracks Save, Edit or Delete a RouteSave or Clear a Current Track View Key POWER/LIGHT KeyKey Functions Info KeyGoto Key Accessory BusPowering Up the Unit Zoom +/- KeyMenu System Main Menu System Normal User ModeSonar Tab, Normal Mode Sonar Tab, Advanced Mode Start-Up Options Menu Exit Normal operation by powering your Matrix offExit the Simulator by powering your Matrix off Normal OperationPC Connect Exit PC Connect mode by powering the Matrix offSystem Status Sensitivity Sonar X-Press MenuSide View Sonar Views OnlyLower Range Chart SpeedUpper Range Side Beam RangeNavigation X-Press Menu To adjust the Bottom ViewBottom View Navigation Views OnlyClear Current Track Cancel NavigationSave Current Track Save Current RouteSonar Menu Tab Remove GridSonar Window Only if a Grid is ActiveTo use Beam Select Beam SelectFish ID+ Highlight Beam Select on the Sonar main menuKHz Balance Fish SensitivityKHz Sensitivity WideSide SensitivityNoise Filter Depth LinesSurface Clutter Transducer Select Max DepthWater Type Navigation Menu TabRoutes TracksWaypoints Lat/Lon Grid Chart Detail LevelMap Borders Spot SoundingsTrack Min Distance Grid RotationTrackpoint Interval Map DatumDelete All Nav Data Alarms Menu TabClear Map Offset To Clear Map OffsetLow Battery Alarm Depth AlarmFish ID Alarm Temp AlarmAlarm Tone Arrival AlarmDrift Alarm Units Temp Setup Menu TabUnits Depth Units DistanceRestore Defaults User ModeTriplog Reset Units SpeedTemp Offset Select ReadoutsDepth Offset Speed CalibrationPosition Format Local Time ZoneDaylight Savings Time Time FormatNmea Output SonarMatrix Doesn’t Power Up Accessories Menu TabTroubleshooting Matrix Defaults to Simulator with a Transducer AttachedFinding the Cause of Noise Display ProblemsProblem Possible Cause IsolationMatrix Accessories SpecificationsContact Humminbird