HOW TO USE
6.Adjust the volume control of the connected AV equipment and the head- phones, and set them to the desired listening level.
At the same time, adjust the ear pad angle to make it fit comfortably.
In case of interference or too much noise (e.g. when used near a cordless phone or any other transmission device), set the transmitter’s CHANNEL to a different position. To
12
CHANNEL
To set optimum signal reception, adjustments should be done within a range of approx.
23ft. (7 m) between the transmitter and the headphones.
Tips for better use
Within approx. 23 ft (7 m)
VOL.
MAX. MIN.
For improved sound quality, set the volume level of the connected equipment as high as possible without causing distortion, while setting volume level of the headphones to a slightly lower level. In surround mode, have the mode turned on while making the adjust- ments as surround mode tend to distort more than normal mode.
After use
The power turns off by removing the headphone from head. When sound signal is not received for two minutes, the transmitter is set to turn off automatically. Recharge the headphone after use.
The headphone is designed to automatically turn off when removed from your head, however auto
Notes:
1.When using the headphones, don’t raise the volume excessively. Continuous listening for a long time at high volumes may damage your hearing.
2.For safety reasons, do not use the headphones while riding a bicycle or driving a motorcycle, car, etc.
3.If the headphone is not used for a prolonged time, unplug the AC adaptor from an AC outlet.
16