Humminbird ProFlasher manual Control Head Installation, Step One Determine Where to Mount

Page 15

INSTALLATION

CONTROL HEAD INSTALLATION

CONTROL HEAD INSTALLATION

Step One - Determine Where to Mount

Begin the installation by determining where to mount the control head. Consider the following to determine best location:

The cables for power, transducer and temp/speed accessories (if applicable) should be installed first and must reach the mounting location. Extension cables are available.

There are two ways to route the cables to the unit: through a hole in the mounting surface underneath the mounting bracket or from a hole outside the mounting bracket. Routing the cables down under the mount provides maximum weather protection; however this is not always feasible if the area under the fishfinder is inaccessible. In this case, route the cables through a hole at another location and cover with the supplied hole cover.

The mounting surface should be adequately supported to protect the fishfinder from excessive wave shock and vibration, and provide visibility while in operation.

The mounting area should allow sufficient room for the unit to pivot and swivel freely, and for easy removal and installation (Figures 18-19).

Step Two - Connect the Power Cable to the Boat

A 6’ (2m) long power cable is included to supply power to the fishfinder. You may shorten or lengthen the cable using 18 gauge multi-stranded copper wire.

CAUTION: Some boats have 24 or 36 volt electric systems. Be sure your unit is connected to a 12 VDC power supply.

The Power can be connected to the boat's electrical system at two

places: a fuse panel, usually located near the console, or directly to the battery.

If a fuse terminal is available, use crimp-on type electrical connectors (not included) that match the terminal on the fuse panel. Attach the black wire to ground, and the red wire to 12 VDC power (Figure 20). Be sure to use a one amp

Image 15
Contents Page Accessories Installation OverviewParts Supplied Determining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesPage Step Five Adjust the Running Position of the Transducer Step Four Mount the Transducer to the TransomConfirm the pivot angle has not changed Page Step Six Route the Cable Inside the Hull Installation Step One Determine the Mounting LocationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Control Head Installation Step One Determine Where to MountStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Testing the Installation Using the PRO Flasher What YOU see on the Display Page Page Maintainence

ProFlasher specifications

The Humminbird ProFlasher is a cutting-edge ice fishing tool that offers anglers an enhanced fishing experience through its innovative design and features. This flasher is a key tool for serious ice fishermen, providing real-time information about underwater conditions and fish activity.

One of the main features of the ProFlasher is its high-resolution display, which utilizes patented technology for accurate representation of the underwater environment. This display provides detailed information about the depth of the water, the location of fish, and the structure of the bottom, enabling users to make informed decisions. The bright LED lights make it easy to see in various lighting conditions, an essential feature for early morning or late afternoon fishing sessions.

Another remarkable technology integrated into the Humminbird ProFlasher is its exclusive, advanced sonar capabilities. The device uses DualBeam PLUS sonar technology that allows anglers to select between two beams - a wide beam for covering more area and a narrow beam for more precise targeting. This flexibility is particularly valuable in varying fishing conditions and types of fish being pursued.

In addition to its sonar capabilities, the ProFlasher is built with a durable construction to withstand the harsh environments encountered during ice fishing. The rugged design ensures that it can endure cold temperatures, impacts, and water exposure without losing functionality.

The battery life of the Humminbird ProFlasher is another characteristic that sets it apart from competitors. It comes equipped with a long-lasting battery that can operate for hours on a single charge, allowing anglers to fish all day without worrying about running out of power.

The ProFlasher also features a user-friendly interface, simplifying navigation through its settings. Intuitive controls allow anglers to easily adjust sensitivity, depth range, and display options, making it accessible for both novice and experienced users.

Additionally, the portability of the ProFlasher is noteworthy. It is lightweight and compact, complete with a carrying case, making it easy to transport to and from fishing locations.

Overall, the Humminbird ProFlasher combines advanced technologies with practical design elements, making it an indispensable tool for any ice fishing enthusiast seeking to enhance their fishing experience. Whether targeting specific fish species or scouting for new fishing spots, the ProFlasher delivers the performance and reliability that serious anglers demand.