Humminbird ProFlasher manual Step Two Drill the Mounting Holes, Step Three Assemble the Transducer

Page 7

INSTALLATION

TRANSOM INSTALLATION

∙If the propeller(s) is (are) forward of the transom, it may be impossible to find an area clear from turbulence, and a different mounting technique or transducer type should be considered.

Step Two - Drill the Mounting Holes

1.Remove the mounting template from the front of the Operations Manual.

2.Hold the template on the transom of the boat in the location where the transducer will be installed (Figure 4). Align the template vertically, ensuring the lower edge of the transom meets with the bottom corner

of the template.

3.Using a pencil or punch, mark the two mounting holes shown on the template onto the transom. Do not mark or drill any other holes at this time.

4.Using a 5/32” (4mm) bit drill the two holes to a depth of approximately 1" (3cm). On fiberglass hulls, it is best to start with a smaller bit and use progressively larger drill bits to reduce the chance of chipping or flaking the outer coating.

Step Three - Assemble the Transducer

1.Attach the Pivot to the transducer body as shown in Figure 5, using the #8 – 3/8” (9mm) long allen headed pivot screw, the headed pin, the two flat washers, and the two toothed lock washers.

Note: The toothed lock washers must be positioned between the transducer and the pivot ears. The flat washers must be positioned to the outside at the pivot ears.

2.Using the AIlen wrenches provided, loosely tighten the pivot screw (Figure 6). Do not completely tighten the assembly at this time, so the pivot angle can be adjusted later.

3.Insert the pivot/transducer assembly into the mounting bracket as shown in Figure 7. Do not snap the assembly closed.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Thru-Hull Mounting Alternate Transducers and Mounting MethodsPortable Mounting Trolling Motor MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesPage Step Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Page Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Testing the Installation Using the PRO Flasher What YOU see on the Display Page Page Maintainence

ProFlasher specifications

The Humminbird ProFlasher is a cutting-edge ice fishing tool that offers anglers an enhanced fishing experience through its innovative design and features. This flasher is a key tool for serious ice fishermen, providing real-time information about underwater conditions and fish activity.

One of the main features of the ProFlasher is its high-resolution display, which utilizes patented technology for accurate representation of the underwater environment. This display provides detailed information about the depth of the water, the location of fish, and the structure of the bottom, enabling users to make informed decisions. The bright LED lights make it easy to see in various lighting conditions, an essential feature for early morning or late afternoon fishing sessions.

Another remarkable technology integrated into the Humminbird ProFlasher is its exclusive, advanced sonar capabilities. The device uses DualBeam PLUS sonar technology that allows anglers to select between two beams - a wide beam for covering more area and a narrow beam for more precise targeting. This flexibility is particularly valuable in varying fishing conditions and types of fish being pursued.

In addition to its sonar capabilities, the ProFlasher is built with a durable construction to withstand the harsh environments encountered during ice fishing. The rugged design ensures that it can endure cold temperatures, impacts, and water exposure without losing functionality.

The battery life of the Humminbird ProFlasher is another characteristic that sets it apart from competitors. It comes equipped with a long-lasting battery that can operate for hours on a single charge, allowing anglers to fish all day without worrying about running out of power.

The ProFlasher also features a user-friendly interface, simplifying navigation through its settings. Intuitive controls allow anglers to easily adjust sensitivity, depth range, and display options, making it accessible for both novice and experienced users.

Additionally, the portability of the ProFlasher is noteworthy. It is lightweight and compact, complete with a carrying case, making it easy to transport to and from fishing locations.

Overall, the Humminbird ProFlasher combines advanced technologies with practical design elements, making it an indispensable tool for any ice fishing enthusiast seeking to enhance their fishing experience. Whether targeting specific fish species or scouting for new fishing spots, the ProFlasher delivers the performance and reliability that serious anglers demand.
Top Page Image Contents