Humminbird ProFlasher manual Step Three Drill the Mounting Holes, Step Four Run the Cables

Page 17

INSTALLATION

CONTROL HEAD INSTALLATION

and one amp fuse (not included) for the protection of the unit (Figure 21). Humminbird is not responsible for over voltage or over current failures.

In order to minimize the potential for interference with other marine electronics a separate power source (such as a second battery) may be necessary.

Step Three - Drill the Mounting Holes

1.Set the mounting bracket in place on the mounting surface. Mark the four mounting screw locations with a pencil or punch.

2.Set the mounting bracket aside, and drill the four mounting screw holes using a 9/64” (3.6mm) bit.

Step Four - Run the Cables

1.If the cables must pass through a hole underneath the mounting surface, mark and drill a 1” (25mm) hole centered between the four mounting holes (Figure 22).

Note: if the cables must pass through the mounting surface at a different location, drill the 1" (25mm) hole at that location and pass the cables through from underneath. Also, you must break out the tabs on the rear of the mounting base using needle nose pliers (Figures 24-25).

2.Insert all cables through the 1” (25mm) hole from beneath the mounting surface.

3.Pass the cables through the grommet (if the cable hole is underneath the mounting bracket) then press the grommet in place around the cables and into the 1” (25mm) hole.

4.Pass the cables through the mounting base, out the top of the mounting bracket.

5.Place the mounting bracket on the mounting surface aligned with the drilled holes. Insert the four flathead wood screws into the mounting holes and tighten fully (Figure 23).

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Parts Supplied AccessoriesInstallation Overview Determining How to Mount the Transducer Portable Mounting Alternate Transducers and Mounting MethodsTrolling Motor Mounting Thru-Hull MountingTransducer Exchange Beginning InstallationStep One Determine Where to Mount the Transducer Transom InstallationStep Three Assemble the Transducer Step Two Drill the Mounting HolesPage Confirm the pivot angle has not changed Step Five Adjust the Running Position of the TransducerStep Four Mount the Transducer to the Transom Page Step Six Route the Cable Step Two Test the Mounting Location Inside the Hull InstallationStep One Determine the Mounting Location Page Step Three Permanently Mount the Transducer Step Two Connect the Power Cable to the Boat Control Head InstallationStep One Determine Where to Mount Page Step Four Run the Cables Step Three Drill the Mounting HolesPage Your Humminbird is now ready for operation Step Five Assembling the Connector HolderTest the Installation Testing the Installation Using the PRO Flasher What YOU see on the Display Page Page Maintainence

ProFlasher specifications

The Humminbird ProFlasher is a cutting-edge ice fishing tool that offers anglers an enhanced fishing experience through its innovative design and features. This flasher is a key tool for serious ice fishermen, providing real-time information about underwater conditions and fish activity.

One of the main features of the ProFlasher is its high-resolution display, which utilizes patented technology for accurate representation of the underwater environment. This display provides detailed information about the depth of the water, the location of fish, and the structure of the bottom, enabling users to make informed decisions. The bright LED lights make it easy to see in various lighting conditions, an essential feature for early morning or late afternoon fishing sessions.

Another remarkable technology integrated into the Humminbird ProFlasher is its exclusive, advanced sonar capabilities. The device uses DualBeam PLUS sonar technology that allows anglers to select between two beams - a wide beam for covering more area and a narrow beam for more precise targeting. This flexibility is particularly valuable in varying fishing conditions and types of fish being pursued.

In addition to its sonar capabilities, the ProFlasher is built with a durable construction to withstand the harsh environments encountered during ice fishing. The rugged design ensures that it can endure cold temperatures, impacts, and water exposure without losing functionality.

The battery life of the Humminbird ProFlasher is another characteristic that sets it apart from competitors. It comes equipped with a long-lasting battery that can operate for hours on a single charge, allowing anglers to fish all day without worrying about running out of power.

The ProFlasher also features a user-friendly interface, simplifying navigation through its settings. Intuitive controls allow anglers to easily adjust sensitivity, depth range, and display options, making it accessible for both novice and experienced users.

Additionally, the portability of the ProFlasher is noteworthy. It is lightweight and compact, complete with a carrying case, making it easy to transport to and from fishing locations.

Overall, the Humminbird ProFlasher combines advanced technologies with practical design elements, making it an indispensable tool for any ice fishing enthusiast seeking to enhance their fishing experience. Whether targeting specific fish species or scouting for new fishing spots, the ProFlasher delivers the performance and reliability that serious anglers demand.
Top Page Image Contents