Humminbird 141c manual Units Depth, Units Temp, Units Distance, Units Speed, User Mode, Language

Page 23

531442-1_A_141c_Eng.qxd 11/15/2005 8:40 PM Page 44

Units - Depth

Units - Depth selects the units of measure for all depth-

related readouts.

To change the Units - Depth setting:

1.Highlight Units - Depth on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth setting. (Meters [International Models only], Feet, Fathoms; Default is Meters for International models, and Feet for Domestic models)

Units - Temp

(International only)

Units - Temp selects the units of measure for all temperature-related readouts

[International Models Only].

To change the Units - Temp setting:

1.Highlight Units - Temp on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp setting. (Celsius, Fahrenheit; Default = Celsius)

Units - Distance

(with Temp/Speed)

Units - Distance selects the units of measure for all distance-related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once.

To change the Units - Distance setting:

1.Highlight Units - Distance on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles; International Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles, Feet/Nautical Miles; Default = Meters/Kilometers)

Units - Speed

(with Temp/Speed)

Units - Speed selects the units of measure for speed-related readouts, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once.

To change the Units - Speed setting:

1.Highlight Units - Speed on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting. (kph [International Models only], mph, kts, Default = kph for International models and mph for Domestic models)

User Mode

User Mode sets the menu system to either Normal or Advanced. When set to Normal (default setting), only the basic menu options are shown. When set to Advanced, additional menu choices are available.

To change the User Mode setting:

1.Highlight User Mode on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting. (Normal, Advanced, Default = Normal)

Language

(International only)

Language selects the display language for menus. International Models only.

To change the Language setting:

1.Highlight Language on the Setup menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting. (Default = English)

39

40

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 141c Operations Manual Thank You Table of ContentsTable of Contents Single Beam Sonar Peak to Peak measures power output at the highest pointsHow Sonar Works High Sonar Intensity Return Bait Ball What’s On the DisplaySonar View ViewsSonar View Sonar View Zoom View Big Digits View Circular Flasher ViewBottom Presentation Understanding Sonar HistoryReal Time Sonar RTS Window Sonar Zoom View Sonar Zoom ViewCircular Flasher View POWER/LIGHT KeyBig Digits View Key FunctionsOwering Up the Unit Menu KeyWAY Cursor Control Key Exit KeyPress TM Menu Sonar Tab, Normal Mode Sonar Tab, Advanced ModeMenu System Simulator Start-Up Options MenuNormal Operation Status Accessory TestSystem Status Sonar X-Press TM Menu Conduct a unit self-testUpper Range To adjust the SensitivityTo adjust the Upper Range SensitivityZoom Level Chart SpeedLower Range Sonar Menu Tab To adjust the Bottom RangeBottom Lock Bottom RangeFish ID Sensitivity To change the Fish ID Sensitivity settingTo change the RTS Window setting Fish ID+TMDepth Lines Bottom ViewZoom Width Max Depth Surface ClutterNoise Filter Water Type Alarms Menu TabTo change the Water Type setting Alarms MenuTemp Alarm Depth AlarmFish ID Alarm Low Battery AlarmHighlight Alarm Tone on the Alarms main menu Alarm ToneSetup Menu Tab To change the Alarm Tone settingUnits Distance User ModeUnits Depth Units TempSelect Views Triplog ResetRestore Defaults Temp Offset Select ReadoutsDepth Offset Advanced, with Temp/Speed only TroubleshootingTo change the Speed Calibration setting Speed CalibrationFinding the Cause of Noise Display ProblemsProblem Possible Cause Control head loses power at high speedsSonar Terms SpecificationsGlossary 531442-1A141cEng.qxd 11/15/2005 840 PM Receiver See Transmitter 531442-1A141cEng.qxd 11/15/2005 840 PM 531442-1A141cEng.qxd 11/15/2005 840 PM Contact Humminbird
Top Page Image Contents