Humminbird 141c manual Lower Range, Chart Speed, Zoom Level

Page 15

531442-1_A_141c_Eng.qxd 11/15/2005 8:39 PM Page 28

Lower Range

Lower Range sets the deepest depth range that will be displayed. Automatic is the default setting. When in automatic mode, the lower range will be adjusted by the unit to follow the bottom. Selecting a specific setting locks the depth range into Manual mode. Use both Upper and Lower Range together to view a specific depth range manually when looking for fish or bottom structure. M will be

displayed in the lower right corner of the screen when you start manually adjusting the Lower Range to indicate that you are in Manual mode.

For example, if you are fishing in 60 feet of water but are only interested in the first 30 feet (surface to a depth of 30 feet) you should set the Lower Depth Range limit to 30. The display will show the 0 to 30 foot range, allowing you to see a more detailed view than you would see if the display went all the way to the bottom.

NOTE: A minimum distance of 10 feet will be maintained between the Upper and Lower Range regardless of the manual settings entered.

To adjust the Lower Range:

1.Highlight Lower Range on the Sonar X-PressTMMenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Lower Range setting. (AUTO, 10 to 600 feet, 3 to 240 meters [International Models only], Default = AUTO)

Chart Speed

Chart Speed determines the speed at which the sonar information moves across the display, and consequently the amount of detail shown. A faster speed shows more information and is preferred by most anglers; however, the sonar information moves across the display quickly. A slower speed keeps the information on the display longer, but the bottom and fish details become compressed and may be difficult to interpret. Regardless of the Chart Speed setting, the RTS® Window will update at the maximum rate possible for the depth conditions. Adjust Chart Speed to your personal preference.

To adjust the Chart Speed:

1.Highlight Chart Speed on the Sonar X-PressTMMenu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to increase or decrease the Chart Speed setting. (1-9, Ultra, where 1 = Slow, 9 = Fast, Ultra = Fastest, Default = 5)

Zoom Level

(Sonar Zoom View only)

Zoom Level sets the magnification level for the Sonar Zoom View, and is only available on the X-PressTMMenu when the Sonar Zoom View is active. Use Zoom to increase the display resolution to separate sonar returns that are very close together.

To adjust the Zoom Level:

1.Highlight Zoom Level on the Sonar X-PressTMMenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Zoom Level setting for the Sonar Zoom View. (2x, 4x, 6x, 8x, Default = 2x)

NOTE: The Zoom Preview Box tracks the bottom and cannot be moved by the user.

23

24

Image 15
Contents 141c Operations Manual Thank You Table of ContentsTable of Contents Peak to Peak measures power output at the highest points How Sonar WorksSingle Beam Sonar High Sonar Intensity Return Bait Ball What’s On the DisplaySonar View ViewsSonar View Sonar View Zoom View Big Digits View Circular Flasher ViewUnderstanding Sonar History Real Time Sonar RTS WindowBottom Presentation Sonar Zoom View Sonar Zoom ViewCircular Flasher View POWER/LIGHT KeyBig Digits View Key FunctionsOwering Up the Unit Menu KeyWAY Cursor Control Key Exit KeySonar Tab, Normal Mode Sonar Tab, Advanced Mode Menu SystemPress TM Menu Start-Up Options Menu Normal OperationSimulator Status Accessory TestSystem Status Sonar X-Press TM Menu Conduct a unit self-testUpper Range To adjust the SensitivityTo adjust the Upper Range SensitivityChart Speed Lower RangeZoom Level Sonar Menu Tab To adjust the Bottom RangeBottom Lock Bottom RangeFish ID Sensitivity To change the Fish ID Sensitivity settingTo change the RTS Window setting Fish ID+TMBottom View Zoom WidthDepth Lines Surface Clutter Noise FilterMax Depth Water Type Alarms Menu TabTo change the Water Type setting Alarms MenuTemp Alarm Depth AlarmFish ID Alarm Low Battery AlarmHighlight Alarm Tone on the Alarms main menu Alarm ToneSetup Menu Tab To change the Alarm Tone settingUnits Distance User ModeUnits Depth Units TempTriplog Reset Restore DefaultsSelect Views Select Readouts Depth OffsetTemp Offset Advanced, with Temp/Speed only TroubleshootingTo change the Speed Calibration setting Speed CalibrationFinding the Cause of Noise Display ProblemsProblem Possible Cause Control head loses power at high speedsSpecifications GlossarySonar Terms 531442-1A141cEng.qxd 11/15/2005 840 PM Receiver See Transmitter 531442-1A141cEng.qxd 11/15/2005 840 PM 531442-1A141cEng.qxd 11/15/2005 840 PM Contact Humminbird