Furuno 511, 520, 611 manual Setting the temperature alarm, Setting the trip distance alarm

Page 57

5. ALARMS

5.1.8Setting the temperature alarm

There are five types of water temperature alarms: UNDER, OVER, INSIDE, OUT and CURRENT RIP. The UNDER and OVER alarms sound when the water temperature is lower or higher than the value set, the INSIDE and OUTSIDE alarms sound when the water temperature is within or outside the range set. For CURRENT RIP, the alarm sounds when the temperature changes over the value set within a minute.

1.Rotate the course control knob to select “TMP” from the ALARM SETUP menu.

2.Press the course control knob to show the temp alarm options window.

OFF

UNDER

OVER

INSIDE

OUT

CUR.

Temp alarm options window

3.Rotate the course control knob to select the water temperature condition. When selecting the INSIDE, OUT or CUR. (current lip), set the number for upper and lower limits. For UNDER or OVER, set a value (Setting range: 0 to 120°F or –20 to 50°C).

4.Press the course control knob.

5.1.9Setting the trip distance alarm

The log trip alarm alerts you a defined distance has been reached.

1.Rotate the course control knob to select “TRIP LOG ALARM” from the ALARM SETUP menu.

2.Press the course control knob to show the log trip options window.

OFF

ON

Log trip options window

3.Rotate the course control knob to select “ON” or “OFF” as appropriate. When selecting ON, set appropriate value (Setting range: 0 to 9999 nm/km/sm).

4.Press the course control knob.

5-7

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Operators Manual 00014860315 Safety Instructions Table of Contents Iii AlarmsFeatures ForewordWord to the Owner of the NAVpilot-511/520/611 System configuration of NAVpilot-511/520/611 System ConfigurationThis page is intentionally left blank Principle of Autopilot Principle of the AutopilotPrinciple of Operation Basic Operation Operating ControlsControl unit, front view Turning the power off Turning On/OffStartup sequence Adjusting Brilliance and Contrast Main menu ex. Stby modeContrast, brilliance window Choosing the display mode DisplaysDisplays Selecting data Selecting the data shown on Data DisplayDisplayed data Analog indicator selectionStby Mode Stby mode display Ex. Normal DisplaySteering Modes Auto Mode Using the Auto modeAuto mode display Ex. Normal Display Advanced Auto mode display Ex. Normal Display Advanced Auto modeEnabling the Advanced Auto mode Advanced auto options windowNAV Mode Starting the NAV modeNAV mode display Ex. Normal Display Selecting sailing method of NAV mode Nav mode options windowNAV mode, Course and XTE Waypoint switching options window Switching waypointSteering Mode Turn Mode Turn menuTurn menu inputting TLL data Example of 180º maneuver in turn mode 180º Turn for Auto mode only360º Turn for Auto mode only Example of 360º maneuver in turn modeExample of orbit maneuver ex. clockwise OrbitTo escape from the Orbit while it is in use, press Stby key Spiral Example of spiral maneuver in turn modeSteering Mode Figure Eight Example of Figure Eight in NAV modeTLL navigation Navigating to TLL pointDial type remote controller FAP-5551 Remote ModeTurning power on dial type FU Follow-Up mode display dial remote controllerRotating dial Turning power off dial typeNFU No Follow-Up mode display Turning power on, button and lever type remote controllersTurning power off, button and lever type remote controllers Operating remote controller ex. button and lever typesDodge Mode Dodging in Stby modeDodge mode display Heading from Dodging in Auto or NAV modeThis page is intentionally left blank Stby Mode Menu Stby mode menuMenu Operation Parameter setup menu Setting parametersSelecting the method of entering the parameter Sea state options windowDeviation level options window MANUAL-CALMExample of Manual parameter Setting parameters manuallyRudder angle and rudder gain setting Track line and weather setting valueWeather Rudder GainCounter Rudder General guidelines for setting counter rudder gainAuto trim options window Adjusting the sensitivity in monitoring the boat’s trimNAV Mode When towing the netNav mode data source window ex. default setting Auto net towing options windowWaypoint Switching Fish ModeRadius of Orbit Spiral SpeedSystem setup menu Setting other menu itemsActivating key beep Key beep options windowLock options window Locking the control unitSetting the panel dimmer Alarms Alarm Setup MenuAlarm setup menu Audio alarm options window Selecting the alarm buzzerAlarm interval options window Selecting the beep patternSetting the watch alarm Setting the heading deviation alarmWatch alarm options window XTE alarm options window Setting the cross-track error limitSpeed alarm options window Setting the speed alarmDepth alarm options window Setting the depth alarmSetting the trip distance alarm Setting the temperature alarmTemp alarm options window Log trip options windowLog trip clear options window Clearing the trip distanceAlarm menu Alarm InformationAlarm messages, their meanings and priorities Alarm messagesPreventive Maintenance Maintenance & TroubleshootingMaintenance program Check point RemedyDiagnostics Replacement of FuseParts Name Type Code No Remarks Test options windowProcessor Unit Test Control Unit TestHeading Sensor Test Keyboard Test Navpilot-511/611 Navpilot-520Screen Test Rudder test Rudder Setup and Auto TestClearing Memories System DataSystem data screen Error Messages Error messagesError message Meaning Remedy Error messages con’t MN-1 Menu TreeMN-2 Auto mode menuControl Unit NAVpilot-511/520/611Processor Unit InterfacePower Supply Environmental ConditionsUnit Color IN-1 Index
Related manuals
Manual 73 pages 37.23 Kb

611, 520, 511 specifications

Furuno is a renowned name in the marine electronics industry, best known for its high-quality navigational and communication tools. Among its diverse product line, the Furuno 511 and 520 stand out as exceptional marine radars designed to enhance boating safety and efficiency.

The Furuno 511 radar is equipped with advanced technologies that offer a range of functionalities essential for navigating in various sea conditions. One of the key features of the 511 is its high-resolution display, which ensures that users can easily interpret radar images in real-time. This radar system operates on a frequency of 9.41 GHz, enabling it to provide superior target detection and tracking capabilities, crucial for identifying other vessels, landmasses, and potential hazards.

Another notable feature of the Furuno 511 is its automatic radar plotting aid (ARPA). This technology allows the radar to track multiple targets simultaneously, providing mariners with critical information such as their relative speed and course. This tracking ability enhances situational awareness and aids in making informed decisions on course adjustments.

On the other hand, the Furuno 520 radar is designed with similar cutting-edge technologies, offering a robust suite of features tailored for both commercial and recreational vessels. The Furuno 520 boasts advanced signal processing capabilities, which result in enhanced target discrimination and a clutter-free display. This is particularly beneficial in busy shipping channels or congested waters where distinguishing essential targets from background noise is vital.

The Furuno 520 also integrates a user-friendly interface, allowing for easy navigation of settings and options. This ease of use is further augmented by customizable display options, enabling users to tailor the radar presentation to meet their specific needs. Additionally, the radar incorporates automatic gain control, ensuring that targets can be seen clearly regardless of environmental conditions.

Both the Furuno 511 and 520 exemplify durability and reliability, constructed to withstand the rigors of maritime environments. With their robust builds and weather-resistant features, these radars are designed to function optimally, providing crucial navigational support in adverse conditions.

In conclusion, the Furuno 511 and 520 radars are exemplary pieces of equipment that deliver essential features and technologies for maritime navigation. Their advanced tracking capabilities, signal processing, and user-friendly interfaces make them ideal for enhancing safety and efficiency on the water. For anyone serious about marine navigation, investing in these high-performance radars is a smart decision that can significantly improve situational awareness and overall boating experience.
Top Page Image Contents