ResMed RPS II, POWER STATION II manual Symbols, General warnings and cautions

Page 12

Symbols

The following symbols may appear on the device or packaging:

Attention, consult accompanying documents; Read instructions before use;

Drip proof; No protection; Class II equipment; European RoHS;

8

Batch Code; Serial number; Catalogue number; Maximum humidity;

Temperature limitation (storage and transport); Charging; Battery charge

level; Audible alert mute; DC input/output; O I DC on/off; Do not use if

package is damaged; Manufacturer; European Authorised Representative;

Environmental Information.

Disposal of the battery and the power supply unit should be carried out in accordance with applicable national laws and regulations. WEEE 2002/96/EC is a European Directive that requires the proper disposal of electrical and electronic equipment. The battery and power supply unit should be disposed of separately, not as unsorted municipal waste. To dispose of your battery and power supply unit, you should use appropriate collection, reuse and recycling systems available in your region. The use of these collection, reuse and recycling systems is designed to reduce pressure on natural resources and prevent hazardous substances from damaging the environment. European Directive 2006/66/EC requires the proper disposal of spent batteries and accumulators. The battery may only be returned to collection points fully discharged. If charged or partially discharged, care should be taken to prevent short circuiting. Batteries containing more than 0.0005% of mercury by mass, more than 0.002% of cadmium by mass or more than 0.004% of lead by mass are marked below the crossed-bin symbol with the chemical symbols (Hg, Cd, Pb) of the metals for which the limit is exceeded.

If you need information on these disposal systems, please contact your local waste administration. The crossed-bin symbol invites you to use these disposal systems. If you require information on collection and disposal of your ResMed device please contact your

ResMed office, local distributor or go to www.resmed.com/environment.

General warnings and cautions

WARNINGS

•• Lithium ion batteries have built-in safety protection circuits, but can still be dangerous if they are not used correctly. Damaged batteries can become inoperative or catch fire.

•• Due to risk of fire or electric shock:

-- do not place the RPS II near open fire or heaters.

-- do not expose the RPS II to direct sunlight or heat (for example behind a car window).

-- do not expose the RPS II to water, rain or high moisture levels. -- do not short-circuit the RPS II.

-- do not use a damaged RPS II.

-- do not open the RPS II or the AC charger.

•• Make sure to revert to AC power when the remaining capacity of RPS II and/or device internal battery is low.

English 7

Image 12
Contents Power Station Power Station 装置样品只是图解 / 裝置只是樣品圖解 DC output voltage & DC cables Svenska Dansk Norsk Suomi Ελληνικά 简体中文 繁體中文 Compatible devices and accessories Intended useRPS II at a glance Control panelSetting up Charging the batteryIndicators Using humidifiers Cleaning and maintenanceStoring ServicingTroubleshooting Your device user guide, or the Battery/DeviceTechnical specifications Symbols General warnings and cautionsRPS Limited warranty Page Respiratory Care Solutions