Planar PT1704Z manual Adjusting the Viewing Angle, Connecting AC Power, AC Power Jack

Page 9

Chapter 1

1.LCD Monitor’s VGA Connector

This 1.5 meter cable has two 15-pin D-Sub VGA connectors used to connect the monitor to your PC’s VGA card.

2.AC Power Jack

Connect the AC adapter cable to this jack.

3.Audio Line In (optional)

Connect your PC’s Line out to this jack to listen to the PC’s audio through your New Planar LCD Monitor’s stereo speakers. (You can also connect your CD-ROM’s Line out to this jack.)

Adjusting the Viewing Angle

Your LCD Monitor is designed to allow you to adjust it to a comfortable viewing angle. The LCD Monitor’s angle setting range is from -5° to 25°.

Connecting AC Power

1.Plug the female end of the power cable into the AC-adapter. Plug the male end of the power cord into a wall socket. The plug on the power cable will vary according to the electrical standard in your area.

2.Connect the power connector of the adapter into the jack of the LCD Monitor. The AC power jack is located at the rear of the Monitor near the D-sub VGA connector.

3

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PT1704Z Manual Page Preface PrefacePlanar User’s Manual Important Safety InstructionsTable of Contents Page Your New Planar LCD Monitor Your New Planar LCD MonitorUnpacking Identifying ComponentsPower on / OFF and Menu Button Adjust Control ButtonsPower-On Indicator Function Select ButtonsConnecting AC Power Adjusting the Viewing AngleChapter LCD Monitor’s VGA Connector AC Power JackConnecting the Stereo Speakers Connecting VideoDisplay Controls Adjusting the Monitor’s DisplayYour New Planar LCD Monitor’s Display Controls OSD Main MenuMonitor- Control Option Auto Adjust ProcedureOSD Control Option ChapterMisc. Control Option Graphic Control OptionOSD Exit Planar User’s Manual Graph/Text OptionTechnical Information Planar TFT LCD Monitor SpecificationsSupported Timing Timing for Model PT1704Z Sxga ResolutionTroubleshooting Procedures Troubleshooting
Top Page Image Contents