Auto Adjust Procedure, Monitor- Control Option

Planar User’s Manual

The OSD-Control option allows you to adjust the position and setting of the monitor’s On Screen

Display.

The MISC-Control option allows you to select the desired text language of the OSD, adjust the monitor speaker volume, and to display the current video information being sent to the monitor from your video card.

The Graphic-Control option allows you to adjust the display contrast, brightness, sharpness, and color settings.

The Graph/Tex option allows you to switch DOS text resolution from 640x400 and 720x400. This function has no effect within graphic operating systems such as MS Windows™.

The OSD Exit option closes the On Screen Display.

Auto Adjust Procedure

Pressing the Adjust key while the Auto Adjust topline menu is selected, activates the Auto Adjust procedure. The Auto Adjust procedure takes approximately 2 seconds to complete. Once finished, the OSD menu will disappear after a short time-out period.

The Monitor- Control Option

Pressing the Adjust key while the Monitor Control icon is selected activates the Monitor Control submenu. Use the ▲FUNCTION ▼ select buttons to scroll between the submenu items. You should only use this menu item if the results of the Auto Adjust function are not satisfactory.

H-Position:Press the Adjust buttons to horizontally move the display image to the desired position.

V-Position:Press the Adjust buttons to vertically move the display image to the desired position.

Phase: Press the Adjust buttons to fine-tune the displayed image. An improper phase adjustment will result in pixel jitter or display noise.

Clock: Press the Adjust buttons to stabilize the display clock timing. An improper clock setting will result in wide vertical bands on the display.