EN |
|
|
| SWITCH CLOCK DISPLAY | |
|
| |
|
|
|
Press MODE to toggle between Clock with Seconds and Clock with Weekday display.
ALARM
This product is equipped with a
VIEW ALARM SETTINGS
Press
. The alarm time and alarm status will show in the Clock Area.
SET ALARM |
|
| |
1. | Press | to switch to alarm display. | |
2. | Press and hold | again for 2 seconds. The alarm | |
| settings will blink. |
| |
3. | Select the hour and minute. Press or to change | ||
| settings. Press | to confirm. | |
ACTIVATE ALARM
Press 
to activate or deactivate the alarm.
shows in the Clock / Alarm Area when the alarm is activated.
SILENCE ALARM
When the alarm time is reached, the crescendo alarm will sound for 2 minutes. To silence the alarm:
•Press SNOOZE to silence it for 8 minutes.
OR
•Press any key except SNOOZE to mute the alarm and activate it again after 24 hours.
If no button is pressed, the alarm will automatically silence after 2 minutes. It will then sound again after 8 minutes.
WEATHER FORECAST
This product forecasts the next 12 to 24 hours of weather within a
SUNNY | PARTLY | CLOUDY | RAINY |
| CLOUDY |
|
|
TEMPERATURE AND HUMIDITY
Thisproductcandisplaycurrent,minimum,andmaximum temperatures and humidity percentage information collected by the remote sensors and main (indoor) unit.
Outdoordataiscollectedanddisplayedevery40seconds. Indoor data is collected and displayed every 10 seconds.
SELECT TEMPERATURE UNIT
Slide the °C / °F switch into the desired location. The switch is located in the main unit battery compartment. The setting for the main unit overrides the remote sensor setting.
SELECT CHANNEL NUMBER
Press CHANNEL to switch between sensors
The icon shows the selected sensor.
KINETIC- |
|
|
|
|
WAVE |
|
|
|
|
ICON |
|
|
|
|
DESIG- | Indoor | Remote | Remote | Remote |
NATED | Display | Display | Display | Display |
DISPLAY |
| Channel 1 | Channel 2 | Channel 3 |
|
|
|
|
|
To
NOTE If you use a sensor that collects only temperature data, humidity will not be shown.
NOTE For more information on the sensor see “Remote Sensor THGR122NX” Section.
MINIMUM / MAXIMUM RECORDS
The MEM button is located in the main unit battery compartment. Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records. To clear the records, press and hold MEM for 2 seconds. A beep will sound to confirm that the memory has been cleared.
MOON PHASE
The Calendar must be set for this feature to work, see “Set Clock” section.
•Press 
or 
to view the moon phase for the next or previous day.
•Press and hold 
or 
to scan quickly through the years (2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
6