Pioneer XW-DV1WS, XV-DV525 Wireless speaker system, Guide and Connecting external antennas on

Additional information 13

Problem	Remedy
Considerable noise in	• Connect an outdoor FM antenna (see Connecting external antennas on
radio broadcasts	page 59).
(continued).	• Connect an additional internal or external AM antenna (refer to the Setup
	Guide and Connecting external antennas on page 59).
	• Turn off any other equipment that may be causing the noise or move it away
	from the main unit.
	• Not applicable to the European model – The tuning interval is incorrect for
	your country or region. Try switching the tuning interval (frequency step) (see
	Frequency step setting on page 66).
Auto tuning does not	• The radio signal is weak. Auto tuning will only detect radio stations with a
pick up some stations.	good signal. For more sensitive tuning, connect an outdoor antenna.
Sound is mono only.	• Check that the tuner is not set to FM mono (see Improving poor FM
	reception on page 26).

Wireless speaker system

Problem	Remedy
Audio cannot be	• The radio wave reception is variable depending on locations due to
received.	the effects of obstacles and reflecting objects. Try changing the
	location of the wireless speaker system a little.
	• The transmitter and wireless speaker are designed and sold as a
	pair, and they identify each other in communication. This means that
	communication is not available between separately purchased
	transmitter and wireless speaker.
Audio is interrupted.	• This system uses high frequency radio waves that have properties
	similar to light, such as linearity, reflection, refraction, diffraction,
	and interference. Therefore, placement of the system can result in
	weak radio waves and/or interruption.
	• The distance between the transmitter and wireless speaker may be
	too large. Use the wireless speaker within the reach of the radio
	waves (within 10m) from the transmitter.
	• The system is being used in a location with radio wave interference
	or electrical noise. If so, the unit may need to be relocated.
Audio is suddenly	• There may be radio communication equipment using the same
interrupted.	frequency band (2.4 GHz) as this system, such as a Bluetooth device,
	radio LAN device or microwave oven, operating nearby.
No sound from the	• If you selected W.Stereo, the volume on the wireless speaker may
wireless speaker.	be turned down too low.

English Deutsch Français Italiano Nederlands Español

75

En