Pioneer VSX-27TX manual Using the front panel 27TX/26TX with the MULTI-ROOM system, Input Selector

Page 69

						Using Other Functions
	Using the front panel (27TX/26TX) with the MULTI-ROOM system
						1 Press the MULTI ROOM & SOURCE button.
						The display shown below will illuminate when the receiver is in
						STANDBY mode.
						Also, the MR&S button will light.
		1		2		3,4,5
				MULTI-ROOM	INPUT	2 Press the CONTROL button.
				MULTI-ROOM	SELECTOR
				& SOURCE
				CONTROL		The light will start to blink.
CD	MD/TAPE1	TUNER PHONO			MASTER
CD	MD/TAPE1	TUNER PHONO			VOLUME	3 Within ten seconds of step 2, select the FUNCTION with
FL		TUNER CONTROL				3 Within ten seconds of step 2, select the FUNCTION with
MMER CLASS		FM/AM	- TUNING +			the INPUT SELECTOR.
NITOR MPX		MEMRY	- STATION +			the INPUT SELECTOR.
APE 2
				MIN	MAX	For this example we'll use the TUNER function. The display shown
						below will illuminate.

The INPUT SELECTOR steps through the functions in the following order:

DVD/LD TV/SAT CD

VCR 1 TUNER MD/TAPE 1

memo If you don't turn the multi room function off you won't be able

to turn the entire system off.

4 Press the CONTROL button again and use the INPUT SELECTOR to adjust the VOLUME. The volume can be adjusted in a range of -82dB to 0dB.

The display will appear as shown below.

5 When in TUNER function, press the CONTROL button and use the INPUT SELECTOR to tune in the station.

The display will appear as shown below.

OPERATION

Ç

Turn the input selector until you get:

69

Image 69

Contents VSX-27TXVSX-26TXVSX-24TX Important Notice For Canadian modelInformation to User Important Safety InstructionsFeatures Table of Contents How to Use This Manual Checking the Supplied AccessoriesPreparing the Remote Control Before You StartOperating range of remote control unit Installing the ReceiverOpening the Front Panel Inches 20 cmCassette deck placement Connecting Your EquipmentAudio Components Audio cordsVideo Components FrontAudio/Video cords Digital audio cords/Optical cables Digital ConnectionsOnly the VSX-27TX has a RF in jack Optical cableExample Connection for a DVD/LD or LD player VSX-26TXRFD-1 Components equipped with 5.1 channel analog output jacks External Decoder InputAntennas Using external antennasAM loop antenna To improve FM receptionSpeakers Powered sub wooferSpeaker terminals Front SpeakersSpeaker impedance 26TX and 24TX only Speaker placementWhile holding down the Speakers button STANDBY/ONPower connections AC Outlets Connecting additional amplifiersSwitched Total 100 W 0.8 a MAX Unswitched 100 W 0.8 a MAXDisplay Displays & ControlsFront Panel VSX-27TX/26TX = Master Volume@ Loudness button See p.42 Tape 2 Monitor button See p.60 Signal Select button See p.40# Midnight button See p.41 $ Digital NR button See p.41Front Panel VSX-24TX Master Volume# Digital NR button See p.41 + Speakers A/B buttons $ Signal Select button See p.40Video Input jacks See p.9 Input ATT buttonRemote Control Remote Setup button System SET UP button# Master Volume button Signal Select buttonSetting Up for Surround Sound Surround Sound Set UpPress System Setup button On Screen DisplayTo the mode you want. Then press Enter Go on to the next page to continue set upPress the 5or arrow buttons to move the hand Select Speaker Setting with the 5´ buttons Speaker SettingSelect a speaker setting mode with the 2´3 buttons Press EnterCenter default setting is Large Front default setting is LargeSurround default setting is Large SUB Woofer default setting is YESSpeaker using the commands below Channel DelayUse the 5´ buttons to select a speaker. Specify Distance from your listening position to eachSelect aTEST Tone mode Channel DELAY, it will already be selectedChannel Level Select Channel Level if continuing fromManu mode Auto modeIf you are using a Sound Pressure Level SPL meter To exit before outputting the Test ToneCrossover Network Select Exit to return to the System Setup MenuSpecify the crossover frequency for your small SpeakersSystem Setup Menu Bass Peak Level ManagerSelect Exit and press Enter to return to Range Control Use the 2 or 3 arrows to choose OFF, MID orMAX Choose a Digital in and assign it an input function Digital-In SelectUse the 2 or 3 to choose the input function that Matches the component hooked up to that digitalBasic Playback IndicatorPlaying Sources with Stereo Sound ReceiverStandard mode Home THX Cinema modeSound Modes DSP modes Stereo modeHall JazzSelecting a Sound Mode Select the sound modeSurround operation Default setting is Stereo For more see Sound Modes p Playing Sources with Dolby Digital or DTS SoundMemo Signal Select Switching ANALOG/DIGITAL Signal InputEach press switches the signal in the order below = Auto = Analog = Digital = AC-3RFReducing noise during playback Digital NR function Listening in Midnight Listening ModeExternal decoder playback Listening in Loudness Mode96kHz 24bit Performance Press External DecoderAdjusting bass and treble tone control Adjusting the brightness of the display front panel onlyDirect playback Using the Tuner Automatic and Manual TuningMPX Mode Direct Access Tuning Memorizing Frequently Used Stations Using the front panelTune in the desired station Press Memory to activate the memory functionRecalling Memorized Stations Using the remote controlUse the number buttons to select the channel you want To skip through each channel in orderSetting Up the Remote Control to Control Other Components Remote Control of Other componentsRecalling preset codes Press Remote SetupPress the Multi Control button for Press Remote Setup to exit the Preset Recall Setup modeComponent you want to control Press the 2/3 buttons to choose the functionPress Remote Setup and 2 at the same time to Select the Learning Setup modeVideo Press the button to be programmed Press Remote Setup to exit the Learning SetupMode To program additional operations for the current componentDVD or LD player operations Using Remote Control with Other ComponentsSource TOP MenuChannel -/+ VCR & DVD video recorder operationsEnter TV/VCR = MenuDisc CD player operationsAllows you to change the display mode of the MD MD operationsDisc DISP/CHARA Guide STB satellite tuner operationsExit MenuSTB DTV operations TV operations Press to switch the TV on or offNumber buttons 1~6 Cassette deck operationsUsing Other Functions Recording from Audio ComponentsRecord monitor Tape 2 Monitor Recording from Digital Audio Components Receiver in that function. Set the SignalPrepare the source you want to record and put Select to digitalRecording from Video Components Set the Signal Select to analogFirst, decide the component youd like to Record and put the receiver in that functionTo cancel Multi Operation Setup mode Press Remote SetupMulti Operations Performing multi operations Using the system off buttonPress Remote Setup and 4 at the same time Setting up the direct functionTo select the Direct Function mode Remote Back LightErasing the learned remote control commands Resetting the Remote ControlErasing all signals learned & preset codes Erasing the multi operationsSet up example Multi-RoomMULTI-ROOM connections Press System Setup on the remote control MULTI-ROOM set up VSX-27TX/26TX onlyRemote Setup Menu appears on your TV screen. You can AgainPress the Multi Room & Source button Using the front panel 27TX/26TX with the MULTI-ROOM systemPress the Control button Within ten seconds of , select the Function withClass Press Volume +/- to adjust the volumeReceiver Station -/+ Number 0~9Control Dolby Digital Techno Tidbits & Problem-solvingLaser disc format Comparison with Dolby Pro Logic SurroundDTS Dolby DigitalDolby Pro Logic SurroundTHX Preset Code List Symptom Cause Remedy TroubleshootingFM broadcasts AM broadcastsAnalog Set Signal Select toVSX-26TX Specifications0 4 2 1 1 4 0 Power cord Caution Maintenance of External SurfacesEIA