6.Securely connect the connectors. ➀ Secure the connectors to the plate cover. ➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is stopped, but this sound is not abnormal.
2
Use the 3 supports on the plate cover to secure the connectors.
1
If you cannot secure a connector to the plate cover, the connector is not completely connected.
Connect the connector again.
7.Attach the front panel.
Insert the tab at the bottom of the front panel into the hole in the main body ➀, and push the plate cover towards the main body. ➁
Use a screwdriver to securely tighten (clockwise) the 2 screws at the top of the front panel.
Tighten the 2 screws.
21
Battery replacement is complete.
11