Omron BUM100S, BUM300S, BUM150S instruction manual Battery replacement is now complete

Page 14

6.Securely connect the connectors. Secure the connectors to the plate cover.

You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s operation is stopped, but this sound is not abnormal.

2

Use the 2 supports at the top and bottom of the plate cover to secure the connectors.

1

If you cannot secure a connector to the plate cover, the connector is not completely connected.

Connect the connector again.

7.Attach the front panel.

Push the front panel toward the main body.

Use a screwdriver to securely tighten (clockwise) the 4 screws at the top of the front panel.

Tighten the 4 screws.

BATTRY UNIT

1

BATTRY UNIT

2

Battery replacement is now complete.

14

Image 14
Contents Do not disassemble, repair, or modify the product Do not insert metal objects into the battery connectors Do not drop the battery or expose it to strong impact Unpacking the product Installation For BUM300S Connecting the additional battery unit BUM100S/150S/300S 2 BUM150S connection procedure / Connectable UPS BU150SW Replacing the battery ➂ ➀ Battery replacement is complete Additional battery unit BUM300S replacement procedure Replacement battery pack Battery replacement is now complete After replacing the battery during operation Dimensions