Omron BUM300S, BUM150S, BUM100S Do not drop the battery or expose it to strong impact

Page 3

Caution (battery replacement)

Do not drop the battery or expose it to strong impact.

Doing so may cause the battery to leak dilute sulfuric acid.

Do not short the battery with metal objects.

Doing so may cause an electric shock, fire or burn.

Some electrical energy remains inside the spent battery.

Do not put the battery into fire, and do not break it.

• The battery may explode or leak dilute sulfuric acid.

Do not use a new battery and an old battery at the same time.

Doing so may cause the battery to leak dilute sulfuric acid.

Notes

Charge the battery (for at least 24 hours) immediately after purchase.

If you do not use the unit for a long time after purchase, the battery performance may deteriorate and it may become unusable.

The battery can be charged once the AC input plug of the UPS is connected to a wall outlet (commercial power).

When storing the UPS, charge the battery for at least 24 hours and turn OFF the power switch.

The battery discharges even when it not being used, and it goes into over discharge state if it is left for a long period of time.

The backup time may become shorter or the battery may become unusable.

We recommend keeping the temperature 25°C or less when storing the unit for long periods of time.

Connect the AC input plug of the UPS to a wall outlet (commercial power) for at least 24 hours at the following intervals:

-Every 6 months when storage temperature is 25°C or less

-Every 2 months when storage temperature is 40°C or less

Turn OFF the power switch of the UPS during storage.

Do not install or store the unit in a place exposed to direct sunlight.

• A rise in temperature may cause the built-in battery to deteriorate rapidly and become unusable.

This unit uses a lead acid battery.

• Lead acid batteries are a valuable recyclable resource. Please recycle.

 

For information about recycling, please contact our peripheral device repair center.

Pb

3

Image 3
Contents Do not disassemble, repair, or modify the product Do not insert metal objects into the battery connectors Do not drop the battery or expose it to strong impact Unpacking the product Installation For BUM300S Connecting the additional battery unit BUM100S/150S/300S 2 BUM150S connection procedure / Connectable UPS BU150SW Replacing the battery ➂ ➀ Battery replacement is complete Additional battery unit BUM300S replacement procedure Replacement battery pack Battery replacement is now complete After replacing the battery during operation Dimensions