Panasonic PT-LC55E, PT-LC75E manual Preparation, Do not handle the power cord plug with wet hands

Models: PT-LC55E PT-LC75E

1 28
Download 28 pages 55.32 Kb
Page 4
Image 4
Do not handle the power cord plug with wet hands.

Do not do anything that might damage the power cord or the power cord plug.

BDo not damage the power cord, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

BIf the power cord is used while damaged, electric shocks, short-circuits or fire may result.

BAsk an Authorised Service Centre to carry out any repairs to the power cord that might be necessary.

Do not handle the power cord plug with wet hands.

BFailure to observe this may result in electric shocks.

Insert the power cord plug securely into the wall outlet.

BIf the plug is not inserted correctly, electric shocks or overheating could result.

BDo not use plugs which are damaged or wall outlets which are coming loose from the wall.

Do not place the projector on top of surfaces which are unstable.

BIf the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over, and injury or damage could result.

Do not place the projector into water or let it become wet.

BFailure to observe this may result in fire or electric shocks.

Do not place liquid containers on top of the projector.

BIf water spills onto the projector or gets inside it, fire or electric shocks could result.

BIf any water gets inside the projector, contact an Authorised Service Centre.

Do not insert any foreign objects into the projector.

BDo not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric shocks.

After removing the battery from the remote control unit, keep the battery out of the reach of small children and infants.

BThe battery can cause death by suffocation if swallowed.

BIf the battery is swallowed, seek medical advice straight away.

Do not allow the + and - terminals of the battery to come into contact with metallic objects such as necklaces or hairpins.

BFailure to observe this may cause the battery to leak, overheat, explode or catch fire.

BStore the battery in a plastic bag and keep it away from metallic objects.

Insulate the battery using tape or similar before disposal.

BIf the battery comes into contact with metallic objects or other batteries, it may catch fire or explode.

During a thunderstorm, do not touch the projector or the cable.

BElectric shocks can result.

Do not use the projector in a bath or shower.

BFire or electric shocks can result.

Do not look into the lens while the projector is being used.

BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

Do not bring your hands or other objects close to the air outlet port.

BHeated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result.

Replacement of the lamp unit should only be carried out by a qualified technician.

BThe lamp unit has high internal pressure. It can easily become damaged if struck against hard objects or dropped, and injury or malfunctions may result.

When replacing the lamp, allow it to cool for at least one hour before handling it.

BThe lamp cover gets very hot, and contact with it can cause burns.

Before replacing the lamp, be sure to unplug the power cord from the power outlet.

BElectric shocks or explosions can result if this is not done.

Caution

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with smoke or steam.

BUsing the projector under such conditions may result in fire or electric shocks.

When disconnecting the power cord, hold the plug, not the cord.

BIf the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocks may result.

Always disconnect all cables before moving the projector.

BMoving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur.

Do not place any heavy objects on top of the projector.

BFailure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury.

Do not short-circuit, heat or disassemble the battery or place it into water or fire.

BFailure to observe this may cause the battery to overheat, leak, explode or catch fire, and burns or other injury may result.

Preparation

6-ENGLISH

ENGLISH-7

Page 4
Image 4
Panasonic PT-LC55E, PT-LC75E manual Preparation, Do not handle the power cord plug with wet hands