Panasonic PT-LC75E, PT-LC55E manual Adjusting the picture, Button to make the picture, RGB only

Adjusting the picture

I button to make the picture

darker. (Adjust the BRIGHT setting

Press the H button to make the selected colour stronger.

Use the F and G buttons on the projector or remote control unit to select an item, and then use the I and H buttons to change the setting for that item.

For items with bar scales, press the ENTER button or the I or H buttons to display the adjustment screen, and then use the I or H buttons to make the adjustment.

When an RGB/YPBPR signal is being input

PICTURE

PICTURE MODE STANDARD

COLOR		32
TINT		32
BRIGHT		32
CONTRAST		32
SHARPNESS		0
COLOR	TEMP .	STANDARD
W - BAL	R	32
W - BAL	G	32
W - BAL	B	32
SIGNAL	MODE	SVGA

STANDARD

SELCT ADJ ESC

When an S-VIDEO/VIDEO signal is being input

PICTURE

PICTURE MODE STANDARD

COLOR32

TINT32

BRIGHT32

CONTRAST 32

SHARPNESS 4

COLOR TEMP . STANDARD

TV - SYSTEM AUTO1

STANDARD

SELCT ADJ ESC

PICTURE MODE

PICTURE MODE STANDARD �

[�

DYNAMIC

[

NATURAL

Select the picture mode that best matches the image source and room conditions.

The mode best used in dark rooms is NATURAL. For rooms having regular lighting conditions in use, select STANDARD. For exceptionally bright rooms, use

DYNAMIC.

COLOR

(S-VIDEO/VIDEO/YPBPRonly) Press the H button to make the colour more vivid in tone, and press the I button to make the colour more pastel in tone.

TINT

(NTSC/NTSC 4.43/YPBPR only) This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.

BRIGHT

This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).

first if required before adjusting the

CONTRAST setting.)

SHARPNESS

Press the H button to make the picture details sharper, and press the I button to make the picture details softer.

Colour Hue Setting (color temperature)

COLOR TEMP . STANDARD

[

HIGH

[�

LOW

This is used to adjust the white areas of the picture if they appear bluish or reddish.

TV SYSTEM

(S-VIDEO/VIDEO only)

AUTO1 The projector automatically distinguishes between NTSC/NTSC 4.43/PAL/SECAM signals.

AUTO2 The projector automatically distinguishes between NTSC/PAL- M/PAL-N signals.

NOTE:

BThis should normally be set to “AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.

WHITE BALANCE R/G/B

(RGB only)

SIGNAL MODE

(RGB/YPBPR only)

This displays the type of signal which is currently being projected. Refer to the table on page 52 for details on each type of signal.

Projecting sRGB- compatible pictures

sRGB is an international colour reproduction standard (IEC61966-2-

1)established by the International Electrotechnical Commission (IEC). If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings.

#Press the F or G button to select “PICTURE MODE”, and then use the I or H button to select “NATURAL”.

$Press the STANDARD (STD) button on the remote control unit.

%Press the F or G button to select “COLOR TEMP.”, and then use the I or H button to select “STANDARD”.

NOTE:

BsRGB is only enabled when RGB signals are being input (when LAMP POWER has been set to “HIGH”).

Basic Operation

CONTRAST

This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the

This is used to adjust the white areas of the picture if they appear colourised. Press the I button to make the selected colour lighter.

32-ENGLISH ENGLISH-33