Philips BDL4645E, BDL3245E Frame comp. Off Frame comp. On, Heat status, Date and time, Schedule

BDL3245E / BDL4245E / BDL4645E

•

Frame comp. - Off

Frame comp. - On

•Enable: Choose to enable or disable the Tiling function. If enabled, the display will apply the settings in {H monitors}, {V monitors}, {Position}, and {Frame comp.}.

•Switch on delay: Set the power-on delaying time (in seconds).The default option {Auto} allows a sequential powering-on for each display by their ID number when multiple displays are connected. The options are: {Off / Auto / 2, 4, 6, 8, 10, 20, 30, 40, 50}

NOTE: The Tiling function will be disabled when the [ON/OFF] button for PIP is pressed.

Heat status

This function allows you to check the thermal status of the display at any time.

Date and time

Adjust the current date and time for the display’s internal clock.

Date and time

Year	2011
Month	08
Day	04
Hour	20
Minute	20
Daylight saving time

			Current date time
			2011 . 08 . 04 20 : 20 : 17
				Press [SET] to set clock
1.	Press [	] button to enter the submenu.
2.	Press [	] or [		] button to toggle among the {Year}, {Month},
	{Day}, {Hour}, {Minute}, and {Daylight saving time} settings.
3.	Press [	] or [		] button to adjust all settings except {Daylight
	saving time}.
4.	Press [SET] button to enter the {Daylight saving} submenu.
5.	Press [	] or [		] button to select item, press [ ] or [ ] button

to adjust.

Schedule

This function allows you to program up to 7 (seven) different scheduled time intervals for the display to activate.

You can select:

•The time for the display to turn on and turn off.

•The days in a week for the display to activate.

•Which input source the display will use for each scheduled activation period.

NOTE: You should set up current date and time in {Date and time} menu before using this function.

1.Press [SET] or [] button to enter the submenu. Schedule

Today		2011 . 08 . 04 THU		20 : 19 : 55
	1	On	Off	Input
2
3		＿ : ＿	＿ : ＿	＿
4
5		Every day	MON	TUE
6		Wed	THU	FRI
7		SAT	SUN	Every week

2.Press [] or [] button to select a schedule item (item number 1 ~ 7), and then press [] button to mark it the item number.

21