Omega Engineering CN1001-RTD manual /DEV Button

5/DEV Button

During the run mode press the /DEV button to display the deviation from setpoint 1.

When configuring your setpoint values, press the /DEV button to scroll to the next digit.

6MENU Button

In the run mode, press the MENU button to terminate the current measuring process and enter you into the configuration mode.

In the configuration mode, press the MENU button to store changes in the non-volatile memory and then advance you to the next menu item.

7RESET Button

In the run mode, press the RESET button to reset the setpoints and display "SP.RS". If display shows peak value, press the RESET button to reset peak value. Display shows "PK.RS".

In the configuration mode, press the RESET button once to review the previous menu.

Pressing the RESET button twice results in a hard reset and returns you to the run mode.

7