Schneider Electric EM4800, EM400 manual Network Connection Ethernet Requirements

Page 14

PowerLogicTM Series EM4000/EM4800

930-112-01-D.00

 

11/2013

 

 

7.Assign the PC a static IP address such that the first three segments are the same as the default IP address, and the last segment is different from the default IP address.

For example, 169.254.0.xxx, where xxx differs from the last segment of the default IP address.

Enter 255.255.255.0 into the subnet mask field.

For Windows 7 users, you must enter the IP address of the meter into the Default Gateway field.

8.Configure the meter. See “Configuring the Meters” on page 7 for configuration instructions.

9.Remove power. Use a properly rated voltage sensing device to confirm power is off.

10.If you wish to lock the configuration parameters, remove the inner cover and move the programming switches (SW1) to the OFF (up) position.

11.Re-install the inner cover.

12.Connect the LAN Ethernet cable if present. 13.Re-install the outer cover.

14.Restore power.

NOTE: All PowerLogic meters have a default IP address of 169.254.0.10 in the absence of a DHCP service.

Network Connection Ethernet Requirements

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

•Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E.

•This equipment must only be installed and serviced by qualified electrical personnel.

•Turn off all power supplying this equipment before working on or inside equipment.

•Always use a properly rated voltage sensing device to confirm power is off.

•Replace all devices, doors and covers before turning on power to this equipment.

•The meters must be connected to the sense voltage and control voltage through a properly rated disconnect.

Failure to follow these instructions will result in death or serious injury.

To connect the PowerLogic meter to the network:

1.Turn off power to the meter with the installed breaker or disconnecting device. Use a properly rated voltage sensing device to confirm power is off.

2.Remove the outer cover.

3.If you are changing parameters that require the programming switch to be on, remove the inner cover and ensure the programming switches are in the ON position.

6

©2013 Schneider Electric All Rights Reserved

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PowerLogicTM Series EM4000/EM4800 Page Safety Information FCC Part 15 Notice Network Compatibility Notice for the Internal Modem Page Table of Contents Schneider Electric All Rights Reserved PowerLogic configuration tool Configuration and ProgrammingParameter Read access Write access Activation time Programming access to meter parametersPowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 11/2013 Parameter Read access Write access Activation time Display NavigationNormal Mode Communications Connections Direct Connection Ethernet RequirementsNetwork Connection Ethernet Requirements Configuring the Meters LoginConnecting to a Meter Configuration tool main windowDiscovered Units dialog box Unit Field Configuration Tab Main configuration window with configured parametersUnit Field Configuration tab parameters Field Parameter DescriptionIntervals tab configuration parameters Parameter DescriptionTypes tab in the Report section 11/2013 Parameter DescriptionTypes tab configuration parameters Reporting Schedule tab configuration parameters 930-112-01-D.00PowerLogicTM Series EM4000/EM4800 11/2013Calculations & Format tab configuration parameters IeeeBACnet tab configuration parameters BACnet tab in the Report sectionComms tab in the Report section Comms tab configuration parameters Manufacturing TabList of supported PowerLogic metering configurations EM4033xx EM4080xx EM4805xx EM4833xx EM4880xxMeter Point Configuration Meter Points Circuits TabPowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 Badge Numbering pane Reset Buttons Pulse Probes Tab Pulse Probes tab Completing the Meter Configuration Saving the configuration settingsSending the configured settings to the meter PowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 User notes PowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 Page PowerLogicTM Series EM4000/EM4800 Multi-Circuit Meters Schneider Electric
Related manuals
Manual 32 pages 1.68 Kb

EM400, EM4800 specifications

Schneider Electric, a global leader in energy management and automation, offers advanced power monitoring solutions that enhance energy efficiency and operational effectiveness. The EM4800 and EM400 series are prominent products in Schneider Electric’s energy monitoring line, designed specifically for efficient energy consumption management in various industrial and commercial applications.

The EM4800 is a comprehensive energy meter that caters to larger facilities and energy-intensive operations. One of its main features is its ability to monitor multiple electrical parameters, including voltage, current, frequency, power factor, and total active/reactive energy. The device supports diverse communication protocols such as Modbus, Ethernet, and BACnet, allowing seamless integration into existing building management systems. This diversity in communication enhances visibility into energy usage and supports real-time monitoring, enabling facility managers to make informed decisions.

On the other hand, the EM400 series is designed for smaller applications while still delivering robust functionality. This series is tailored for monitoring power consumption in smaller commercial buildings or branch offices. EM400 meters focus on essential energy metrics but do so with a compact, easy-to-install design. With features like demand forecasting and peak load management, the EM400 provides valuable insights that help organizations optimize their energy usage.

Both models come equipped with advanced technologies such as harmonic analysis, which is crucial for understanding power quality and mitigating potential risks associated with harmonic distortion. The user-friendly interface of these devices facilitates quick access to energy data, making it simple for users to analyze consumption patterns and identify opportunities for energy savings.

In concurrence with Schneider Electric’s commitment to sustainability, both the EM4800 and EM400 series emphasize energy conservation by promoting efficient energy practices. Users can leverage the collected data to reduce energy costs, enhance equipment performance, and contribute to environmental sustainability efforts.

In summary, Schneider Electric’s EM4800 and EM400 energy meters combine innovative technology with practical features aimed at improving energy management. Their advanced monitoring capabilities, versatile communication options, and focus on power quality make them essential tools for organizations seeking to enhance operational efficiency while reducing their carbon footprint. By investing in these cutting-edge energy solutions, businesses can take significant strides towards sustainable energy management and operational excellence.
Top Page Image Contents