Schneider Electric manual PowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013

Page 30

PowerLogicTM Series EM4000/EM4800

930-112-01-D.00

 

11/2013

 

 

To change the current rating for all probes assigned to a meter point:

1.Select a meter from the Meter Points (Circuits) List. The selected meter will appear in the Name field of the middle pane. See Figure 14.

2.In the Alter Current for Probes pane, enter the desired value referenced to the CT primary rating in the Current field, and click on Change Probes in Selected Meter.

To change the current rating for all probes assigned to all meter points:

1.In the Alter Current for Probes CT primary rating in the Current Meters. See Figure 14.

Badge Numbering

pane, enter the desired value referenced to the field, and click on Change all Probes in all

Each meter point can be configured with a name defined by the user. The meter point name, known as the badge number, can be up to 13 alphanumeric characters in length. The Badge Numbering pane allows the user to set two types of badge numbers:

•sequential, which assigns a badge number to each meter point after the prefix (for example CORP-00000001 to CORP-00000012)

•grouped by meter, which uses a base prefix to designate the meter, then assigns a sequential badge number suffix to each meter point assigned to that meter (for example CORP-00001-01 to CORP-00001-12)

The configuration tool provides examples before the badge number is assigned to the meter. In the Badge Numbering pane shown in Figure 15, the following fields and buttons are provided for assigning badge numbers:

•Prefix field - an alphanumeric field that prefixes the number field.

•Badge Number field - a numeric field that becomes part of the prefix for meter points assigned to that meter, or the first number in the sequence to be assigned to individual meter points.

•Badge Number Width field - a numeric field that defines the number of digits in the badge number field. Zeroes (0) are automatically entered at the beginning of the badge number field until the total number of digits in the badge number field equals the number of digits defined in the badge number width field.

•Incremental badge numbers button - selecting this button assigns a sequential badge number for each meter point

•Single badge number button - selecting this button assigns one badge number prefix followed by a numeric suffix for each meter point assigned to that meter.

•Assign Badge Numbers button - selecting this button implements the badge numbering defined by the user in the previous fields.

22

©2013 Schneider Electric All Rights Reserved

Page 29 Page 31
Image 30
Page 29 Page 31
Contents PowerLogicTM Series EM4000/EM4800 Page Safety Information FCC Part 15 Notice Network Compatibility Notice for the Internal Modem Page Table of Contents Schneider Electric All Rights Reserved PowerLogic configuration tool Configuration and ProgrammingProgramming access to meter parameters PowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013Parameter Read access Write access Activation time 11/2013 Parameter Read access Write access Activation time Display NavigationNormal Mode Communications Connections Direct Connection Ethernet RequirementsNetwork Connection Ethernet Requirements Configuring the Meters LoginConnecting to a Meter Configuration tool main windowDiscovered Units dialog box Unit Field Configuration Tab Main configuration window with configured parametersUnit Field Configuration tab parameters Field Parameter DescriptionIntervals tab configuration parameters Parameter DescriptionTypes tab in the Report section 11/2013 Parameter DescriptionTypes tab configuration parameters Reporting Schedule tab configuration parameters 930-112-01-D.00PowerLogicTM Series EM4000/EM4800 11/2013Calculations & Format tab configuration parameters IeeeBACnet tab configuration parameters BACnet tab in the Report sectionComms tab in the Report section Comms tab configuration parameters Manufacturing TabList of supported PowerLogic metering configurations EM4033xx EM4080xx EM4805xx EM4833xx EM4880xxMeter Point Configuration Meter Points Circuits TabPowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 Badge Numbering pane Reset Buttons Pulse Probes Tab Pulse Probes tab Completing the Meter Configuration Saving the configuration settingsSending the configured settings to the meter PowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 User notes PowerLogicTM Series EM4000/EM4800 930-112-01-D.00 11/2013 Page PowerLogicTM Series EM4000/EM4800 Multi-Circuit Meters Schneider Electric
Related manuals
Manual 32 pages 1.68 Kb

EM400, EM4800 specifications

Schneider Electric, a global leader in energy management and automation, offers advanced power monitoring solutions that enhance energy efficiency and operational effectiveness. The EM4800 and EM400 series are prominent products in Schneider Electric’s energy monitoring line, designed specifically for efficient energy consumption management in various industrial and commercial applications.

The EM4800 is a comprehensive energy meter that caters to larger facilities and energy-intensive operations. One of its main features is its ability to monitor multiple electrical parameters, including voltage, current, frequency, power factor, and total active/reactive energy. The device supports diverse communication protocols such as Modbus, Ethernet, and BACnet, allowing seamless integration into existing building management systems. This diversity in communication enhances visibility into energy usage and supports real-time monitoring, enabling facility managers to make informed decisions.

On the other hand, the EM400 series is designed for smaller applications while still delivering robust functionality. This series is tailored for monitoring power consumption in smaller commercial buildings or branch offices. EM400 meters focus on essential energy metrics but do so with a compact, easy-to-install design. With features like demand forecasting and peak load management, the EM400 provides valuable insights that help organizations optimize their energy usage.

Both models come equipped with advanced technologies such as harmonic analysis, which is crucial for understanding power quality and mitigating potential risks associated with harmonic distortion. The user-friendly interface of these devices facilitates quick access to energy data, making it simple for users to analyze consumption patterns and identify opportunities for energy savings.

In concurrence with Schneider Electric’s commitment to sustainability, both the EM4800 and EM400 series emphasize energy conservation by promoting efficient energy practices. Users can leverage the collected data to reduce energy costs, enhance equipment performance, and contribute to environmental sustainability efforts.

In summary, Schneider Electric’s EM4800 and EM400 energy meters combine innovative technology with practical features aimed at improving energy management. Their advanced monitoring capabilities, versatile communication options, and focus on power quality make them essential tools for organizations seeking to enhance operational efficiency while reducing their carbon footprint. By investing in these cutting-edge energy solutions, businesses can take significant strides towards sustainable energy management and operational excellence.
Top Page Image Contents