NEC PX-50XM4G DISP. Mode settings, Auto ID settings, Image Adjust settings, On Delay settings

Page 34

CONFIDENTIAL

DISP. MODE

Select the screen mode from between two options (Splitting, Blanking).

Example: Setting “BLANK”

On “ DISP. MODE” of “ VIDEO WALL” menu, select “ BLANK” .

 

 

 

 

VIDEO WALL

 

 

DIVIDER

:

1

 

POSITION

 

 

 

 

DISP. MODE

 

:

BLANK

 

 

 

 

 

 

AUTO ID

:

OFF

IMAGE ADJUST

 

 

 

P. ON DELAY

:

OFF

PLE LINK

:

OFF

REPEAT TIMER

:

OFF

 

 

SEL.

ADJ.

EXIT

RETURN

Information

DISP. MODE settings

SPLIT: Combines enlarged screens and creates multiple screens.

BLANK: Corrects misalignment of combined screen portions and creates multiple screens

AUTO ID

This feature automatically sets the ID numbers of multiple displays connected to each other.

Example: Setting “ON”

Set the ID number for the No. 1 display on ID NUMBER menu.

On “ AUTO ID” of “ VIDEO WALL” menu, select “ ON” , then press the MENU/ENTER button.

 

 

AUTO ID

 

 

AUTO ID

:

ON

 

1

2

1

2

3

4

3

8

9

4

 

 

7

6

5

WIRED CABLE

CONNECTION TURN

ADJ.

EXIT

RETURN

Information

AUTO ID settings

ON: Enables Auto ID function. In the case shown below, display 1 will be set as ID 1, display 2 as ID2, etc. This can be set only when a 22 or 33 video wall is selected.

IMAGE ADJUST

The position of the image can be adjusted and flickering of the image can be corrected.

Example: Adjusting the vertical position

On “ VIDEO WALL” menu, select “ IMAGE ADJUST” , then press the MENU/ENTER button.

The “ IMAGE ADJUST” screen appears.

On “ V-POSITION” of “ IMAGE ADJUST” menu, adjust the position.

 

 

IMAGE ADJUST

 

 

 

 

ASPECT MODE

 

:

NORMAL

 

 

 

 

 

V-POSITION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H-POSITION

 

 

 

 

 

 

 

 

 

 

V-HEIGHT

 

 

 

 

 

 

 

 

 

 

H-WIDTH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUTO PICTURE

 

:

OFF

 

 

 

 

FINE PICTURE

 

 

 

 

 

 

 

 

 

 

PICTURE ADJ.

 

 

 

 

 

 

 

V-POSITION

 

+64

 

SEL.

ADJ.

 

EXIT

RETURN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

IMAGE ADJUST settings

These are the same functions as the IMAGE ADJUST menu on page E-20.

P. ON DELAY (Power on delay)

Use this function to activate power-on delay.

Turn on the AUTO ID before the following operations. Example: Setting “ON”

On “ P. ON DELAY” of “ VIDEO WALL” menu, select “ ON” .

 

 

 

 

VIDEO WALL

 

 

DIVIDER

:

1

 

POSITION

 

 

 

DISP. MODE

:

SPLIT

AUTO ID

:

OFF

IMAGE ADJUST

 

 

 

 

P. ON DELAY

 

:

ON

 

 

 

 

 

 

PLE LINK

:

OFF

REPEAT TIMER

:

OFF

 

 

SEL.

ADJ.

EXIT

RETURN

Information

P. ON DELAY settings

ON: Turns on the main power of each display after a delay time.

OFF: Turns on the main power of all displays at the same time.

(Only for 16 and 25 screens)

MODE1: Turns on the main power of each display

REMOTE IN

REMOTE OUT

No.1 No.2

No.4 No.3

Display 1

No.1 No.2

No.4 No.3

Display 4

REMOTE

OUT

REMOTE

IN

REMOTE

OUT

REMOTE

IN

No.1 No.2

No.4 No.3

Display 2

No.1 No.2

No.4 No.3

Display 3

REMOTE OUT

REMOTE IN

delayed.

MODE2: Turns on the main power of each display more delayed.

* Once this function has been set to “ ON” , POWER ON/

OFF button on the remote control does not function

except for the No.1 monitor.

By pressing the POWER ON button on the remote

control the No.1 monitor will turn on and the others

OFF: Disables Auto ID function.

will be turned on one by one automatically.

* From the second monitor onward, neither the POWER

button on the unit nor the POWER ON button on the

remote control works. However, by pressing and holding

the POWER ON button for more than 3 seconds, the

monitor will be turned on.

Downloaded From TV-Manual.com Manuals

E-30

4-34

Image 34
Contents PlasmaSync Plasma Monitor HD/DVD/DTV input signals supported on this system SignalsTable of Signals Supported Supported resolutionImportant Information English Deutsch Français Español Italiano Precautions Important InformationContents Installation Ventilation Requirements for enclosure mountingCable Management Video signal RGB/DVD/HD signalCreating a video wall CablesUsing the wired remote control mode How to use the remote controlBattery Installation and Replacement Handling the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide Operations Picture Size setting When Picture Size is set to OFF Supported resolution TrueSplit Screen Operations Operations in the Side-by-side modeShowing a couple of pictures on the screen at the same time Adjusting the OSM controls Operations in the Picture-in-picture modeSelecting the input signals to be displayed Zooming up pictures Advanced menu mode Menu OperationsReset Menu Tree Restoring the factory default settings LanguageSetting the color temperature Picture Settings MenuAdjusting the picture Reducing noise in the pictureAdjusting the colors Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma CurveSetting the allocation of the audio connectors Audio Settings MenuImage Adjust Settings Menu Adjusting the Position, Size, Fine Picture, Picture AdjSetting the BNC connectors Option1 Settings MenuSetting the on-screen menu Setting the RGB1 connectorResetting to the default values Setting the Input SkipSetting high definition images to the suitable screen size Setting the picture to suit the movie Option2 Settings MenuSetting the power management for computer images POWER/STANDBY indicatorOrbiter Function settings Orbiter settingsInverse Settings Setting the timeSoft Focus settings Setting the gray level for the sides of the screenSetting the screen size for S1/S2 video input Gray Level settingsSetting the signal and black level for DVI signal Option3 Settings MenuSetting the picture size for RGB input signals Using the timerTo reset the data Program Timer settingsTo reset the program Special characters in the Program Timer screenLoop Out setting Setting the power on modeEnabling/disabling remote control wireless transmission Enabling/disabling the front panel controlsID number setting Video Wall settingImage Adjust settings DISP. Mode settingsAuto ID settings On Delay settingsRepeat Timer PLE Link settingsRepeat Timer settings PLE LinkNo input signal Option4 Settings MenuErasing the sub screen image when there is Displaying still images in the sub screenSwitching the input source quickly Advanced OSM Settings MenuLanguage Settings Menu Setting the menu modeExample Setting the color system to 3.58 Ntsc Color System Settings MenuSetting the video signal format Video signal formatsExternal Control Pin AssignmentsTroubleshooting Symptom Checks Remedy
Related manuals
Manual 40 pages 42.62 Kb

PX-50XM4G specifications

The NEC PlasmaSync 50XM4 and PX-50XM4G series are notable displays in the realm of high-definition plasma technology. Renowned for their exceptional picture quality and versatile features, they have been designed to meet the needs of various professional environments, including corporate settings, educational institutions, and retail applications.

At the heart of both models is a stunning 50-inch diagonal screen, capable of delivering a resolution of 1366 x 768 pixels. This high resolution ensures that images are clear, vibrant, and rich in detail, making it an excellent choice for displaying high-quality graphics, video content, and data presentations. The displays boast a high contrast ratio, which enhances the depth and richness of blacks, while bright colors pop, resulting in an immersive viewing experience.

One of the standout features of the NEC PlasmaSync series is their advanced plasma technology, which provides extensive viewing angles of up to 160 degrees. This allows multiple viewers to enjoy consistent picture quality from various positions in a room, making the models suitable for large audiences. Additionally, these displays utilize a fast response time, minimizing motion blur during dynamic video playback, which is essential for action-packed content.

The NEC PlasmaSync 50XM4 and PX-50XM4G are equipped with an array of connectivity options, including multiple HDMI ports, VGA inputs, and composite video connectors. This flexibility allows users to easily connect various devices such as computers, Blu-ray players, and media players, making these displays adaptable to a wide range of uses.

Moreover, both models incorporate built-in speakers, delivering decent audio quality suitable for presentations and video playback without the need for external sound systems. This is particularly advantageous in situations where space is limited or a quick setup is required.

With their sleek and professional design, the NEC PlasmaSync series can seamlessly fit into any environment. The displays can be mounted on walls or used with stands, offering further versatility. They also feature a robust thermal management system that ensures optimal performance while preventing overheating, a crucial aspect for prolonged usage in demanding settings.

In conclusion, the NEC PlasmaSync 50XM4 and PX-50XM4G represent a compelling fusion of cutting-edge plasma technology, extensive connectivity, and user-friendly features. Whether for business or education, these displays are engineered to deliver stunning visuals and reliable performance, making them a valuable investment for any professional setting.