NEC PX-50XM4G user manual Setting the power on mode, Enabling/disabling the front panel controls

Page 32

CONFIDENTIAL

Setting the power on mode

This function sets the input mode at the time the power is switched on.

Example: Setting “VIDEO2”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ PWR. ON MODE” of “ OPTION3” menu, select “ VIDEO2” .

The available sources depend on the settings of input.

 

 

OPTION3

 

3 / 4

 

PREVIOUS PAGE

 

 

TIMER

 

 

 

 

 

:

VIDEO2

 

PWR. ON MODE

 

CONTROL LOCK

:

OFF

IR REMOTE

:

ON

LOOP OUT

:

OFF

ID NUMBER

:

ALL

VIDEO WALL

 

 

NEXT PAGE

 

 

SEL.

ADJ.

EXIT RETURN

Information

PWR. ON MODE settings

LAST: Last mode (the input that was last selected at the time the power was switched off).

VIDEO1, 2, 3: VIDEO input mode.

RGB1, 2, 3: RGB input mode.

HD/DVD1, 2: HD/DVD input mode.

DVD2, 3: DVD input mode.

MULTI: Multi screen mode.

Follow the procedure used for PROGRAM TIMER. See page E-27.

Enabling/disabling the front panel controls

This function enables/disables the front panel controls.

Example: Setting “ON”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ CONTROL LOCK” of “ OPTION3” menu, select “ ON” , then press the MENU/ENTER button.

 

 

OPTION3

 

3 / 4

 

PREVIOUS PAGE

 

 

TIMER

 

 

PWR. ON MODE

:

LAST

 

 

 

:

ON

 

CONTROL LOCK

 

IR REMOTE

:

ON

LOOP OUT

:

OFF

ID NUMBER

:

ALL

VIDEO WALL

 

 

NEXT PAGE

 

 

SEL.

ADJ.

EXIT RETURN

Information

CONTROL LOCK settings

ON: Disables the buttons on the front panel.

OFF: Enables the buttons on the front panel.

*Even when the CONTROL LOCK is set, the POWER switch will not be locked.

*This becomes effective when the on-screen menu goes out.

Enabling/disabling remote control wireless transmission

This function enables/disables remote control wireless transmission.

Example: Setting “OFF”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ IR REMOTE” of “ OPTION3” menu, select “ OFF” , then press the MENU/ENTER button.

 

 

OPTION3

 

3 / 4

 

PREVIOUS PAGE

 

 

TIMER

 

 

PWR. ON MODE

:

LAST

CONTROL LOCK

:

OFF

 

 

 

:

OFF

 

IR REMOTE

 

LOOP OUT

:

OFF

ID NUMBER

:

ALL

VIDEO WALL

 

 

NEXT PAGE

 

 

SEL.

ADJ.

EXIT RETURN

Information

IR REMOTE settings

ON: Enables remote control wireless transmission.

OFF: Disables remote control wireless transmission. Set “ OFF” to avoid unwanted control from other remote controls.

Loop Out setting

When this feature is set to ON, the received signal will be looped out.

Example: Setting “ON”

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ LOOP OUT” of “ OPTION3” menu, select “ ON” .

 

OPTION3

 

3 / 4

PREVIOUS PAGE

 

 

TIMER

 

 

PWR. ON MODE

:

LAST

CONTROL LOCK

:

OFF

IR REMOTE

:

ON

LOOP OUT

 

:

ON

ID NUMBER

:

ALL

VIDEO WALL

 

 

NEXT PAGE

 

 

SEL.

ADJ.

EXIT RETURN

Information

LOOP OUT settings

ON: The received signal will be looped out via PC1 terminal or VIDEO1 terminal.

OFF: The received signal will not loop out.

*Even if LOOP OUT is ON, signals won’t be sent out if POWER is being turned off.

To connect another display...

See page E-5.

If the RGB/PC1 signal is present at the time the power switched on...

The RGB/PC1 input will be displayed regardless of the setting of LOOP OUT.

Downloaded From TV-Manual.com Manuals

E-28

4-32

Image 32
Contents PlasmaSync Plasma Monitor HD/DVD/DTV input signals supported on this system SignalsTable of Signals Supported Supported resolutionImportant Information English Deutsch Français Español Italiano Precautions Important InformationContents Installation Ventilation Requirements for enclosure mountingVideo signal RGB/DVD/HD signal Creating a video wallCable Management CablesHow to use the remote control Battery Installation and ReplacementUsing the wired remote control mode Handling the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide OperationsWhen Picture Size is set to OFF  Supported resolution Picture Size setting TrueShowing a couple of pictures on the screen at the same time Operations in the Side-by-side modeSplit Screen Operations Operations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the OSM controls Zooming up pictures Advanced menu mode Menu OperationsReset Menu Tree Restoring the factory default settings LanguagePicture Settings Menu Adjusting the pictureSetting the color temperature Reducing noise in the pictureAdjusting the color to the desired level Making the Low Tone adjustmentsAdjusting the colors Changing the Gamma CurveAudio Settings Menu Image Adjust Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjOption1 Settings Menu Setting the on-screen menuSetting the BNC connectors Setting the RGB1 connectorSetting high definition images to the suitable screen size Setting the Input SkipResetting to the default values Option2 Settings Menu Setting the power management for computer imagesSetting the picture to suit the movie POWER/STANDBY indicatorOrbiter settings Inverse SettingsOrbiter Function settings Setting the timeSetting the gray level for the sides of the screen Setting the screen size for S1/S2 video inputSoft Focus settings Gray Level settingsOption3 Settings Menu Setting the picture size for RGB input signalsSetting the signal and black level for DVI signal Using the timerProgram Timer settings To reset the programTo reset the data Special characters in the Program Timer screenSetting the power on mode Enabling/disabling remote control wireless transmissionLoop Out setting Enabling/disabling the front panel controlsID number setting Video Wall settingDISP. Mode settings Auto ID settingsImage Adjust settings On Delay settingsPLE Link settings Repeat Timer settingsRepeat Timer PLE LinkOption4 Settings Menu Erasing the sub screen image when there isNo input signal Displaying still images in the sub screenAdvanced OSM Settings Menu Language Settings MenuSwitching the input source quickly Setting the menu modeColor System Settings Menu Setting the video signal formatExample Setting the color system to 3.58 Ntsc Video signal formatsExternal Control Pin AssignmentsTroubleshooting Symptom Checks Remedy
Related manuals
Manual 40 pages 42.62 Kb

PX-50XM4G specifications

The NEC PlasmaSync 50XM4 and PX-50XM4G series are notable displays in the realm of high-definition plasma technology. Renowned for their exceptional picture quality and versatile features, they have been designed to meet the needs of various professional environments, including corporate settings, educational institutions, and retail applications.

At the heart of both models is a stunning 50-inch diagonal screen, capable of delivering a resolution of 1366 x 768 pixels. This high resolution ensures that images are clear, vibrant, and rich in detail, making it an excellent choice for displaying high-quality graphics, video content, and data presentations. The displays boast a high contrast ratio, which enhances the depth and richness of blacks, while bright colors pop, resulting in an immersive viewing experience.

One of the standout features of the NEC PlasmaSync series is their advanced plasma technology, which provides extensive viewing angles of up to 160 degrees. This allows multiple viewers to enjoy consistent picture quality from various positions in a room, making the models suitable for large audiences. Additionally, these displays utilize a fast response time, minimizing motion blur during dynamic video playback, which is essential for action-packed content.

The NEC PlasmaSync 50XM4 and PX-50XM4G are equipped with an array of connectivity options, including multiple HDMI ports, VGA inputs, and composite video connectors. This flexibility allows users to easily connect various devices such as computers, Blu-ray players, and media players, making these displays adaptable to a wide range of uses.

Moreover, both models incorporate built-in speakers, delivering decent audio quality suitable for presentations and video playback without the need for external sound systems. This is particularly advantageous in situations where space is limited or a quick setup is required.

With their sleek and professional design, the NEC PlasmaSync series can seamlessly fit into any environment. The displays can be mounted on walls or used with stands, offering further versatility. They also feature a robust thermal management system that ensures optimal performance while preventing overheating, a crucial aspect for prolonged usage in demanding settings.

In conclusion, the NEC PlasmaSync 50XM4 and PX-50XM4G represent a compelling fusion of cutting-edge plasma technology, extensive connectivity, and user-friendly features. Whether for business or education, these displays are engineered to deliver stunning visuals and reliable performance, making them a valuable investment for any professional setting.