NEC PX-50XM4G Advanced OSM Settings Menu, Language Settings Menu, Setting the menu mode

Page 37

CONFIDENTIAL

Side-by-Side

Picture-in-Picture

 

RGB/PC1

 

RGB/PC1

 

 

 

 

SELECT/

 

SELECT/

 

FREEZE

 

FREEZE

 

button

 

button

S BY S1

RGB/PC1

RGB/PC1

RGB/PC1

RGB/PC1

 

 

 

or

 

 

S BY S2

 

 

RGB/PC1

RGB/PC1

 

 

Switching the input source quickly

This feature enables quick input selection.

After setting ON, press the CLEAR/SEAMLESS SW button for quick switching between the two selected input signals.

Example: Set to switch quickly between RGB1 and RGB2.

Set “ADVANCED OSM” to “ON” in the main menu (1/ 2), then perform the following operations.

On “ SEAMLESS SW” of “ OPTION4” menu, select “ ON” . Select “ RGB1” and “ RGB2” .

 

 

 

OPTION4

 

4 / 4

 

PREVIOUS PAGE

 

 

 

SUB. P DETECT

 

:

AUTO

ZOOM NAV

 

:

BTM LFT

PIC FREEZE

 

:

S BY S

SEAMLESS SW

 

:

ON

 

SELECT1

 

:

RGB1

 

SELECT2

 

 

:

RGB2

 

SEL.

ADJ.

 

 

RETURN

 

 

EXIT

* The available sources depend on the settings of input.

Information

SEAMLESS SW Function

*This feature will not function for certain input combinations. See the table on page E-13.

*After switching to the selected input, please operate this function.

*This feature will not function during split screen mode.

*When SEAMLESS SW is first turned on, or when signals being transmitted are changed, there may be a slight delay due to signal analysis.

SEAMLESS SW settings

OFF: Turns off the SEAMLESS SW function.

ON: When the CLEAR/SEAMLESS SW button is pressed, input signals will switch quickly according to the setting of SELECT1 and SELECT2.

Advanced OSM Settings Menu

Setting the menu mode

This allows you to access full menu items.

When P. ON DELAY or PLE LINK is ON, this won’t be turned OFF.

Example: Setting “ON”

On “ ADVANCED OSM” of “ MAIN MENU” , select “ ON” .

 

 

MAIN MENU

1 / 2

 

 

MAIN MENU

1 / 2

PICTURE

 

 

 

 

PICTURE

 

 

 

 

AUDIO

 

 

 

 

AUDIO

 

 

 

 

IMAGE ADJUST

 

 

 

 

IMAGE ADJUST

 

 

 

 

OPTION1

 

 

 

 

OPTION1

 

 

 

 

 

 

 

 

 

 

OPTION2

 

 

 

 

 

 

 

 

 

 

OPTION3

 

 

 

 

 

 

 

 

 

 

OPTION4

 

 

 

 

ADVANCED OSM

 

:

OFF

ADVANCED OSM

 

:

ON

 

NEXT PAGE

 

 

 

 

 

NEXT PAGE

 

 

 

 

 

SEL.

ADJ.

 

EXIT

EXIT

 

SEL.

ADJ.

 

EXIT

EXIT

Information

ADVANCED OSM settings

ON: All of the main menu items are available for advanced users.

OFF: Some of the main menu items are not available (e.g. OPTION2, OPTION3 and OPTION4).

Language Settings Menu

Setting the language for the menus

The menu display can be set to one of eight languages.

Example: Setting the menu display to “DEUTSCH”

On “ MAIN MENU” , select “ LANGUAGE” , then press the MENU/ENTER button.

The “ LANGUAGE” screen appears.

On “ LANGUAGE” , select “ DEUTSCH” , then press the MENU/ENTER button.

LANGUAGE

LANGUAGE

:DEUTSCH

ADJ.

MENU/ENTER

OK

EXIT

RETURN

The “ LANGUAGE” is set to “ DEUTSCH” and return to the main menu.

Information

Language settings

ENGLISH

English

ITALIANO

Italian

DEUTSCH

German

SVENSKA

Swedish

FRANÇ AIS

French

...................

Chinese

ESPAÑ OL

Spanish

У

Russian

Downloaded From TV-Manual.com Manuals

E-33

4-37

Image 37
Contents PlasmaSync Plasma Monitor Signals HD/DVD/DTV input signals supported on this systemSupported resolution Table of Signals SupportedImportant Information English Deutsch Français Español Italiano Important Information PrecautionsContents Ventilation Requirements for enclosure mounting InstallationCreating a video wall Video signal RGB/DVD/HD signalCable Management CablesBattery Installation and Replacement How to use the remote controlUsing the wired remote control mode Handling the remote controlFront View Part Names and FunctionRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discs Supported resolution When Picture Size is set to OFF Picture Size setting TrueSplit Screen Operations Operations in the Side-by-side modeShowing a couple of pictures on the screen at the same time Selecting the input signals to be displayed Operations in the Picture-in-picture modeAdjusting the OSM controls Zooming up picturesMenu Operations  Advanced menu modeMenu Tree ResetLanguage  Restoring the factory default settingsAdjusting the picture Picture Settings MenuSetting the color temperature Reducing noise in the pictureMaking the Low Tone adjustments Adjusting the color to the desired levelAdjusting the colors Changing the Gamma CurveImage Adjust Settings Menu Audio Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSetting the on-screen menu Option1 Settings MenuSetting the BNC connectors Setting the RGB1 connectorResetting to the default values Setting the Input SkipSetting high definition images to the suitable screen size Setting the power management for computer images Option2 Settings MenuSetting the picture to suit the movie POWER/STANDBY indicatorInverse Settings Orbiter settingsOrbiter Function settings Setting the timeSetting the screen size for S1/S2 video input Setting the gray level for the sides of the screenSoft Focus settings Gray Level settingsSetting the picture size for RGB input signals Option3 Settings MenuSetting the signal and black level for DVI signal Using the timerTo reset the program Program Timer settingsTo reset the data Special characters in the Program Timer screenEnabling/disabling remote control wireless transmission Setting the power on modeLoop Out setting Enabling/disabling the front panel controlsVideo Wall setting ID number settingAuto ID settings DISP. Mode settingsImage Adjust settings On Delay settingsRepeat Timer settings PLE Link settingsRepeat Timer PLE LinkErasing the sub screen image when there is Option4 Settings MenuNo input signal Displaying still images in the sub screenLanguage Settings Menu Advanced OSM Settings MenuSwitching the input source quickly Setting the menu modeSetting the video signal format Color System Settings MenuExample Setting the color system to 3.58 Ntsc Video signal formatsPin Assignments External ControlSymptom Checks Remedy Troubleshooting
Related manuals
Manual 40 pages 42.62 Kb

PX-50XM4G specifications

The NEC PlasmaSync 50XM4 and PX-50XM4G series are notable displays in the realm of high-definition plasma technology. Renowned for their exceptional picture quality and versatile features, they have been designed to meet the needs of various professional environments, including corporate settings, educational institutions, and retail applications.

At the heart of both models is a stunning 50-inch diagonal screen, capable of delivering a resolution of 1366 x 768 pixels. This high resolution ensures that images are clear, vibrant, and rich in detail, making it an excellent choice for displaying high-quality graphics, video content, and data presentations. The displays boast a high contrast ratio, which enhances the depth and richness of blacks, while bright colors pop, resulting in an immersive viewing experience.

One of the standout features of the NEC PlasmaSync series is their advanced plasma technology, which provides extensive viewing angles of up to 160 degrees. This allows multiple viewers to enjoy consistent picture quality from various positions in a room, making the models suitable for large audiences. Additionally, these displays utilize a fast response time, minimizing motion blur during dynamic video playback, which is essential for action-packed content.

The NEC PlasmaSync 50XM4 and PX-50XM4G are equipped with an array of connectivity options, including multiple HDMI ports, VGA inputs, and composite video connectors. This flexibility allows users to easily connect various devices such as computers, Blu-ray players, and media players, making these displays adaptable to a wide range of uses.

Moreover, both models incorporate built-in speakers, delivering decent audio quality suitable for presentations and video playback without the need for external sound systems. This is particularly advantageous in situations where space is limited or a quick setup is required.

With their sleek and professional design, the NEC PlasmaSync series can seamlessly fit into any environment. The displays can be mounted on walls or used with stands, offering further versatility. They also feature a robust thermal management system that ensures optimal performance while preventing overheating, a crucial aspect for prolonged usage in demanding settings.

In conclusion, the NEC PlasmaSync 50XM4 and PX-50XM4G represent a compelling fusion of cutting-edge plasma technology, extensive connectivity, and user-friendly features. Whether for business or education, these displays are engineered to deliver stunning visuals and reliable performance, making them a valuable investment for any professional setting.