Pioneer KEH-P7020R operation manual Switching the dimmer setting, Selecting the brightness

Page 38

Section

08Initial Settings

Switching the dimmer setting

To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can switch dimmer on or off.

1 Press FUNCTION to select DIM.

Press FUNCTION repeatedly until Dimmer appears in the display.

2 Select DIM on or off with 5/∞.

Pressing 5/∞ will switch Dimmer between on and off and that status will be displayed (e.g., Dimmer :ON).

Selecting the brightness

You can select the display brightness. Initially this mode is set to 12.

1Press FUNCTION to select BRIGHT. Press FUNCTION repeatedly until Brightness appears in the display.

2Select the desired brightness with 2/3.

• The display shows 0 – 15.

Selecting the illumination color

This product is equipped with two illumination colors, green and red.

You can select the desired illumination color.

1 Press FUNCTION to select ILL.

Press FUNCTION repeatedly until ILLUMI appears in the display.

2Select the desired illumination color with

2/3.

Pressing 2/3 will switch ILLUMI between red or green and that status will be displayed (e.g.,

ILLUMI :GRN).

Setting the rear output and sub- woofer controller

This product’s rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker (Rear SP:FULL) or subwoofer (Rear SP:S.W) connection. If you switch rear output setting to the Rear SP:S.W, you can con- nect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speaker connection (Rear SP:FULL).

When rear output are connected to full range speakers (when Rear SP:FULL is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the subwoofer controller’s (low pass filter, phase) built-inS.W Control:INT or the auxiliary S.W Control:EXT.

Notes

•Even if you change this setting, there is no output unless you switch the non fading out- put (refer to page 34) or subwoofer output (refer to page 33) in the audio menu on.

•If you change the subwoofer controller, sub- woofer output and non fading output in the audio menu return to the factory settings.

•Both rear speaker leads output and RCA rear output are switched simultaneously in this setting mode.

1 Press FUNCTION to select SW.

Press FUNCTION repeatedly until Rear SP appears in the display.

2Change the rear output setting with 5/∞. Pressing 5/∞ will switch between Rear SP :FULL (full-range speaker) and Rear SP :S.W (subwoofer) and that status will be displayed.

38En

Page 37 Page 39
Image 38
Page 37 Page 39
Contents KEH-P7020R English EspañolBefore You Start ContentsPower ON/OFF TunerEnglish Audio AdjustmentsInitial Settings Multi-CD PlayerOther Functions Additional InformationBefore You Start Protecting your unit from theft Replacing the lithium batteryUsing the steering remote control Feature demo About the demo modeReverse mode Removing the front panelWhat’s what Head Unit@ ATT button Steering remote control EnglishEQ button Selecting a source Power ON/OFFTurning the unit on Turning the unit offTuner Listening to the radioStoring and recalling broadcast Introduction of advanced tunerOperation Frequencies Press Function to display the function namesPress Function to select BSM Tuning in strong signalsStoring the strongest broadcast Frequencies Press 5 to turn BSM onIntroduction of RDS operation Switching the RDS display04 RDS Selecting alternative frequencies Using PI SeekUsing Auto PI Seek for preset stations Limiting stations to regional program- mingTune in a TP or enhanced other network’s TP station Responding to the TP alarmReceiving traffic announcements Press TA to turn traffic announcement standby onReceiving PTY alarm broadcasts Using PTY functionsUsing news program interruption Searching for a RDS station by PTY informationStoring and recalling radio text Using radio textDisplaying radio text PTY list General SpecificIInsert a cassette tape into the cassette loading slot Cassette PlayerPlaying a tape To perform fast forward or rewind, press 2 orRadio intercept Repeating playSkipping blank tape sections Introduction of advanced cassette player operationPlaying a CD Using Dolby noise reductionMulti-CD Player Disc multi-CD player Introduction of advanced multi- CD player operationPlaying tracks in a random order Scanning CDs and tracksCreating a playlist with ITS program Pausing CD playbackUsing ITS playlists MingErasing a CD from your ITS playlist Playback from your ITS playlistErasing a track from your ITS playlist Using disc title functions Entering disc titlesSelecting discs from the disc title list Using CD Text functionsDisplaying disc titles Displaying titles on CD Text discsIntroduction of audio Adjustments Audio AdjustmentsUsing compression and bass emphasis Setting the sound focus equal- izer Using balance adjustmentRecalling equalizer curves Using the equalizerAdjusting equalizer curves Fine adjusting equalizer curve Adjusting bassAdjusting treble Press Audio to select BassAdjusting loudness Using subwoofer outputAdjusting non fading output level Using non fading outputUsing the high pass filter Adjusting source levels Automatic sound levelizer func TionSetting the time Initial SettingsAdjusting initial settings Setting the FM tuning stepSwitching the warning tone Setting the DAB Priority FunctionSwitching Auto PI Seek Switching the auxiliary settingSelecting the brightness Switching the dimmer settingSetting the rear output and sub- woofer controller Selecting the illumination colorSwitching the telephone standby Switching the handsfree telephoningSwitching the Telephone Muting/Attenuation Setting the AUX title Using different entertainment displaysUsing the AUX source Other FunctionsTelephone muting/attenuation func- tion Handsfree telephoning functionChanging the Label Introduction of DAB operationOperation Available PTY Function Using dynamic labelOperating Announcements with the Function Menu Searching the PTYCassette tapes Cleaning the playback headAdditional Information Storing and recalling dynamic labelMusic search and repeat functions Specifications Additional Information Encendido y Apagado ContenidoAntes de empezar Sintonizador Audición de radioAjustes de audio Ajustes inicialesOtras funciones Informaciones adicionalesAntes de empezar Uso del control remoto de volante Protección del producto contra roboPara cambiar la pila de litio ImportanteColocación del panel delantero Acerca del modo de demostraciónExtracción del panel delantero Modo de retrocesoQué es cada cosa Unidad principal@ Botón ATT Control remoto de volanteBotón EQ Selección de una fuente Encendido y ApagadoEncendido del sistema Apagado del sistemaSintonizador Audición de radioAlmacenaje y llamada de frecuencias Introducción a las operaciones avanzadas del sintonizadorSintonía de señales fuertes Almacenaje de las frecuencias de Radio más fuertesIndicador AF Introducción a la operación RDSCambio de la visualización RDS Indicador TPUso de la búsqueda PI para emisoras Preajustadas Selección de frecuencias alternativasUso de la búsqueda PI Limitación de las emisoras paraSintonice una emisora TP o emisora TP de otra red realzada Respuesta a la alarma TPRecepción de anuncios de tráfico Presione TA para activar la espera por anuncio de tráficoUso de la interrupción por programa De noticias Uso de las funciones PTYBúsqueda de una emisora RDS por información PTY Mantenga TA presionado para activar laAlmacenamiento y llamada de texto de radio Uso del texto de radioVisualización de texto de radio Presione Text para visualizar el texto de radioLista PTY GeneralLector de cassette Reproducción de una cintaIntercepción de radio Repetición de reproducciónSalto de espacios en blanco Reproducción de un CD Lector de Multi-CDUso de reducción de ruido Dolby Presione Source para seleccionar el lector de Multi-CDVisualización Function Lector de Multi-CD de 50 discosEspañol De las funcionesPresione 2 o 3 para seleccionar la gama de repetición Reproducción de las pistas en un orden aleatorioExploración de CDs y pistas Presione 5 para activar la reproducción aleatoriaPausa de la reproducción de un Uso de listas de reproducción ITSPresione 5 para activar la reproducción Borrado de una pista de la lista de reproducción ITSBorrado de un CD de la lista de reproducción ITS Presione ∞ para desactivar la reproducciónUso de las funciones de título de disco Introducción de títulos de discoSelección de disco de la lista de títulos de disco Uso de las funciones CD TextVisualización de los títulos de discos Visualización de títulos en discos CD TextIntroducción a los ajustes de Audio Ajustes de audioUso de la compresión y énfasis de los graves Presione Sfeq para seleccionar el modo Sfeq deseado Ajuste del ecualizador de enfoque de sonidoUso del ajuste del equilibrio Presione 2 o 3 para seleccionar la posición deseadaAjuste de las curvas de ecualización Uso del ecualizadorLlamada de las curvas de ecualización Ajuste fino de la curva de ecualización Ajuste de los gravesAjuste de los agudos Ajuste de las definiciones de Subgraves Ajuste de la sonoridadUso de la salida de subgraves Ajuste del nivel de salida sin extinción Uso de la salida sin extinciónUso del filtro de paso alto Presione 5 para activar la salida sin extinciónAjuste de los niveles de la fuente Función de nivelador de sonido AutomáticoPuesta en hora Configuración de los ajustes inicialesAjustes iniciales Ajuste del paso de sintonía deCambio del tono de advertencia Ajuste de la función de prioridadCambio de la búsqueda PI automática Cambio del ajuste deSelección del color de iluminación Cambio del ajuste del reductor de luzSelección del brillo Seleccione el brillo deseado con 2/3Conmutación de la espera de teléfono Conmutación del Enmudecimiento/atenuación delTeléfono Conmutación de la conversación telefónica de manos libresUso de diferentes visualizaciones de entretenimiento Otras funcionesUso de la fuente AUX Ajuste del título del componente auxiliarFunción de teléfono de manos libres Función de enmudecimiento/ atenuación del teléfonoCambio de la etiqueta Introducción sobre la operaciónOperación Función PTY disponible Operación de los anuncios con el menú de funcionesUso de la etiqueta dinámica Búsqueda PTYLimpieza de la cabeza de repro- ducción Informaciones adicionalesCassettes Almacenamiento y llamada de etiquetas dinámicasBúsqueda musical y funciones de repetición Sintonizador MW EspecificacionesSintonizador FM Sintonizador LWInformaciones adicionales Page Page Pioneer Corporation

KEH-P7020R specifications

The Pioneer KEH-P7020R is a car stereo that blends cutting-edge technology with user-friendly features, designed to enhance the driving experience through superior sound quality and innovative functionalities. Known for its sleek design, this model has garnered attention for its versatility and performance in various driving environments.

At the heart of the KEH-P7020R is its high-performance audio processing capability. The unit is equipped with a built-in MOSFET amplifier, delivering impressive power output that allows users to enjoy crystal-clear audio at high volumes without distortion. With 50 watts of peak power per channel, it ensures that every note and beat can be enjoyed fully, making it an ideal choice for audiophiles on the road.

One of the standout features of the KEH-P7020R is its comprehensive sound control options. The unit includes a 5-band graphic equalizer, enabling users to fine-tune their audio experience according to personal preferences or the acoustics of the vehicle. This customization extends to functions such as loudness control, subwoofer controls, and a high-pass filter, offering flexibility for all types of music.

The Pioneer KEH-P7020R also supports various media formats, including CDs and MP3 files, making it a versatile choice for different audio sources. The CD player is designed for quick loading and playback, while the front auxiliary input allows for easy connectivity with MP3 players, smartphones, or other external devices.

Another key feature is the radio tuner, which offers excellent reception capabilities. The RDS (Radio Data System) functionality enhances the user experience by providing additional information like station name, song title, and artist. This ensures that drivers can stay informed while enjoying their favorite music stations.

In terms of design, the KEH-P7020R boasts an elegant and intuitive interface. The large, easy-to-read display helps users navigate through settings effortlessly, while the ergonomic button layout ensures quick access to essential functions without distraction.

Furthermore, this car stereo comes equipped with features aimed at enhancing safety while driving. With its detachable faceplate, it not only deters theft but also adds convenience for users who wish to keep their units secure when away from the vehicle.

Overall, the Pioneer KEH-P7020R stands out as a solid choice for drivers looking for a car stereo that combines advanced audio technology with practical features, ensuring a superior listening experience on every journey.
Top Page Image Contents