Uniden UM380BK owner manual Making an automatic distress call, Calling all stations All-Ships Call

Page 27

5.The radio displays the MMSI number you are about to call and asks you to confirm. If you want to call the displayed MMSI number, select Send. To cancel the call, select Cancel.

6.The radio automatically switches to channel 70 to transmit the call request.

xx When the other station accepts the call, both radios switch to the selected response channel for voice transmission.

xx If the other station cannot respond on the channel you selected, the radio displays Not support CH.

Calling a particular group of stations (Group Call)

Group calling calls all the stations that share your group MMSI. You must have a group MMSI programmed into the radio to make a group call, and the stations (boats) you are calling must have this same group MMSI programmed into their radios.

1.Press CALL-MENUto display the call menu.

2.Select Group.

3.The radio prompts you to select a response channel. Use CHANNEL UP and CHANNEL DOWN to scroll through the available channels. When you reach the channel you want to use for a response, press ENT-1W/25W.

4.The radio asks you to confirm the call. Select Send to continue with the call or select Cancel to cancel the call.

5.The radio switches to channel 70 to transmit the call request then automatically switches to the designated response channel.

Calling all stations (All-Ships Call)

All ships calling contacts all DSC radios within range of your boat. You should only use all ships calling in the event of a Safety warning (such as debris in the water) or to request assistance in an Urgency (any situation where your vessel has a serious problem but is not yet in distress).

1.Open the call menu.

2.Select All Ships, and then choose whether this is an Urgency call or a Safety call.

3.The radio asks you to confirm the call. Select Send to continue with the call or select Cancel to cancel the call.

4.The radio automatically switches to channel 70 to transmit the call request then automatically switches to channel 16, the designated response channel for all-ships calling.

Making an automatic distress call

If you have programmed your MMSI number, your radio can transmit an automated distress call with your current location and nature of the distress. The radio then monitors the channel 16 for a response and repeats the distress call every few minutes until it receives an acknowledgement.

To send an automatic distress call, press and hold DISTRESS for three seconds. If no MMSI number has been programmed, the radio prompts you to enter your MMSI number.

If you want to include the nature of your distress in the distress call, use the following distress procedure:

English 21

Page 26 Page 28
Image 27
Page 26 Page 28
Contents UM380 Making a Voice Distress Call Making a Distress CallFaire un appel de détresse vocal Faire un appel de détresseCómo hacer una llamada de apuro por voz Cómo hacer una llamada de apuroContents Channel descriptions and what Conventions FeaturesIntroduction Manual overviewWhat’s included Getting StartedButton Press to Press and hold to Parts of the RadioTurning on the Radio Connector/Cable Connects to For details, seeCancel scanning and stay on Talk on a channel Channel Parts of the MicrophoneSetting the UIC Channel Mode USA/CAN/INT Mode What It Does Use It When To Turn it on./offHow It Works Normal mode operation Watch Mode What It Does Use It When To Turn it on./offMessage Meaning Monitoring Channel Using the radio in normal modeNormal mode with Weather Alert Watch Normal mode with Triple and Dual WatchMode Scan modeNormal mode with both Weather Alert and Triple/Dual Watch Using the radio in scanScan mode with both Weather Alert and Triple/Dual Watch Weather modeScan mode with Weather Alert Watch Scan mode with Triple and Dual WatchMonitoring Weather Channel WX08 Using Your RadioUsing the radio in weather mode Weather mode with Weather Alert WatchMaking a voice Mayday call Using Your RadioSetting the volume Setting the squelch levelBoosting the transmission power Changing the channelMaking a transmission Choosing Triple Watch or Dual Watch Using Fips codes for weather alertsContrast Setting the GPS position manuallyLamp adjust Changing display and sound optionsMinute mark Next level Displays apply Timeframe Is GPS Display Alert Condition Notes Connected?Feature Menu Item Function Using Digital Selective Calling DSC FeaturesWhat is DSC? Advanced DSC featuresWhat is an Mmsi number? Entering Mmsi numbersIndividual or User Mmsi Number Setup Group Mmsi Using the DirectoryCall type What it does When to use it Making DSC CallsChannel Up Button Channel Down Button Select Individual Calling a single station Individual CallMaking an automatic distress call Calling a particular group of stations Group CallCalling all stations All-Ships Call Canceling an automatic distress call Receiving a DSC callReceive log Making Test Calls Test Test CallsDSC Call Type Receive Log Information Returning a callEnabling automatic test call reply Receiving Test CallsEnabling automatic position reply Position Request and ReplyRequesting another station’s position POS Request Receiving a position request Position ReplyDisabling automatic channel switching Putting the radio into standbySending your own position Position Send Mounting the radio Installing the HardwarePower Supply Requirements VHF Antenna Requirements Connecting the radioGround Wire Color Connecting to a GPS receiverGPS Verification Configuring the GPSConnecting to an External Speaker Connecting to a ChartplotterProblem Things to Try Maintenance and TroubleshootingEngine Noise Suppression Specifications Radio SpecificationsTransmitter Channel name/description Used for Reference TablesChannel descriptions and what they mean ReceiverCh No RX Freq TX Freq Status Name on display US Marine Channels and FrequenciesCanadian Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display International Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display Types of events Weather Channels and Frequencies US, CAN, and INTEmergency Alert System Same Information Ch No RX Freq Name on displayFLA VOW Nmea Input No Response Event CodeNmea Operation Nmea OutputRegulations and Safety Warnings Three Year Limited Warranty
Top Page Image Contents