Uniden UM380BK owner manual No Response Event Code, Nmea Operation, Nmea Output, Nmea Input

Page 50

No Response Event Code

TXB	Transmitter Backup On
TXF	Transmitter Carrier On
TXO	Transmitter Carrier On
TXP	Transmitter Primary On

NMEA Operation

This radio supports NMEA0183 version 4.01.

NMEA Input

If you have difficulty getting your radio to receive data from your GPS receiver, check the device’s configuration. It should be set to the following parameters:

Baud rate	4800 bps
Data bits	8
Parity	None
Stop bits	1
Data amplitude	Over 2.0 V
Drive capability	Over 10 mA

The radio supports RMC, GLL, GNS, GGA and ZDA sentences. When these sentences are received, the radio displays latitude/longitude, date, time, course, and speed. If any sentence except an RMC or GLL sentence is received, the radio uses the information based on the following priority order.

xx Status:RMC > GLL > GNS > GGA

xx Latitude/Longitude:RMC > GLL > GNS > GGA xx UTC Time: RMC > GLL > GNS > GGA > ZDA xx Date: RMC > ZDA

xx Speed / Course:RMC

##NOTE 1: If the radio receives only a GLL sentence, the radio does not display the current speed, course, and date.

##Note 2: If the radio receives both RMC and GLL sentences, the radio uses only the RMC sentence.

##Note 3: Status data is used to check whether the GPS data is valid or invalid.

NMEA Output

When the radio receives a DSC call (Distress, Position Reply, or Position Send), it outputs a DSC/DSE sentence from the NMEA output port.

##NOTE: When the radio receives a distress call, it outputs a sentence in the following format. xx $CDDSC,12,3081234000,,07,00,0354013946,0657,,,S,E*6D

xx $CDDSE,1,1,A,3081234000,00,60875646*13

44English

Image 50

Contents UM380 Making a Distress Call Making a Voice Distress CallFaire un appel de détresse Faire un appel de détresse vocalCómo hacer una llamada de apuro Cómo hacer una llamada de apuro por vozContents Channel descriptions and what Manual overview FeaturesIntroduction ConventionsGetting Started What’s includedParts of the Radio Button Press to Press and hold toParts of the Microphone Connector/Cable Connects to For details, seeCancel scanning and stay on Talk on a channel Channel Turning on the RadioHow It Works Setting the UIC Channel Mode USA/CAN/INTMode What It Does Use It When To Turn it on./off Message Meaning Normal mode operationWatch Mode What It Does Use It When To Turn it on./off Normal mode with Triple and Dual Watch Using the radio in normal modeNormal mode with Weather Alert Watch Monitoring ChannelUsing the radio in scan Scan modeNormal mode with both Weather Alert and Triple/Dual Watch ModeScan mode with Triple and Dual Watch Weather modeScan mode with Weather Alert Watch Scan mode with both Weather Alert and Triple/Dual WatchWeather mode with Weather Alert Watch Using Your RadioUsing the radio in weather mode Monitoring Weather Channel WX08Setting the squelch level Using Your RadioSetting the volume Making a voice Mayday callMaking a transmission Boosting the transmission powerChanging the channel Using Fips codes for weather alerts Choosing Triple Watch or Dual WatchChanging display and sound options Setting the GPS position manuallyLamp adjust ContrastTimeframe Is GPS Display Alert Condition Notes Connected? Minute mark Next level Displays applyAdvanced DSC features Using Digital Selective Calling DSC FeaturesWhat is DSC? Feature Menu Item FunctionIndividual or User Mmsi Number What is an Mmsi number?Entering Mmsi numbers Using the Directory Setup Group MmsiChannel Up Button Channel Down Button Call type What it does When to use itMaking DSC Calls Calling a single station Individual Call Select IndividualCalling all stations All-Ships Call Making an automatic distress callCalling a particular group of stations Group Call Receive log Canceling an automatic distress callReceiving a DSC call Returning a call Test CallsDSC Call Type Receive Log Information Making Test Calls TestReceiving Test Calls Enabling automatic test call replyReceiving a position request Position Reply Position Request and ReplyRequesting another station’s position POS Request Enabling automatic position replySending your own position Position Send Disabling automatic channel switchingPutting the radio into standby Installing the Hardware Mounting the radioConnecting the radio Power Supply Requirements VHF Antenna RequirementsConnecting to a GPS receiver Ground Wire ColorConfiguring the GPS GPS VerificationConnecting to a Chartplotter Connecting to an External SpeakerMaintenance and Troubleshooting Problem Things to TryEngine Noise Suppression Transmitter SpecificationsRadio Specifications Receiver Reference TablesChannel descriptions and what they mean Channel name/description Used forUS Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on displayCanadian Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display International Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display Ch No RX Freq Name on display Weather Channels and Frequencies US, CAN, and INTEmergency Alert System Same Information Types of eventsFLA VOW Nmea Output No Response Event CodeNmea Operation Nmea InputRegulations and Safety Warnings Three Year Limited Warranty