Polk Audio Understanding Your Warranty and Speaker Specifications

Page 14

ENGLISH

 

ESPAÑOL

POLK AUDIO LIMITED WARRANTY

SPECIFICATIONS

ESPECIFICACIONES

Driver Complement:

Complemento del Driver:

2x 1"(25mm) Dynamic Balance® dome tweeters

2 x 1" (25 mm) tweeters de domo Dynamic Balance

2x 6 1/2"(165mm) Dynamic Balance drivers

2 x 6 1/2" (165 mm) drivers Dynamic Balance

Overall Frequency Response:

Respuesta Total de Frecuencias:

40Hz - 26kHz

40 Hz - 26 kHz

-3dB Limits:

-3dB Límites:

50Hz - 25kHz

50 Hz - 25 kHz

Crossover Topology:

Topología de Crossover:

2nd Order Low Pass Filter @2 kHz

2o Orden Filtro de Paso Bajo @2 kHz

2nd Order High Pass Filter @2 kHz Mylar film capacitors

2o Orden Filtro de Paso Alto @2 kHz Capacitadores de

used throughout

película mylar usados exclusivamente

Impedance:

Impedancia Nominal:

compatible with 8 ohm outputs

compatible con salidas de 8 ohms

Recommended Amplification:

Amplificación Recomendada:

20 - 250 WRMS

20 - 250 WRMS

Efficiency (1M, 1Watt):

Eficiencia (1M, 1 Watt):

90dB

90 dB

Available Finishes:

Acabados Disponibles:

Black or Rosewood Finish Wood Veneer

Revestimiento de Madera Negro o Palisandro

Dimensions:

Dimensiones:

11 1/4"W x 19 13/16"H x 9 3/4"D

11 1/4" Ancho x 19 13/16" Altura x 9 3/4" Profundidad

28.6cm W x 50.3cm H x 24.8cm D

28.6 cm Ancho x 50.3 cm Altura x 24.8 cm Profundidad

Includes depth of wall mount brackets

Incluye la profundidad de los brazos para instalación

Shipping Weight:

sobre la pared

55lbs / 25kgs

Peso de Embarque:

 

55 libras / 25 kg.

Polk Audio, Inc. warrants to the original pur- chaser only that this Polk Audio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of five (5) years from the date of origi- nal retail purchase from a Polk Audio Authorized Dealer. However, this Warranty will automatically terminate prior to the expi- ration of the five (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall hereinafter be referred to as “you.” To allow Polk Audio to offer the best possible warranty service, please fill out the Product Registration Card(s) and send it to the Factory, at the address provided on the Product Cards(s) within ten (10) days of the date of purchase.

Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to the Factory at 2550 Britannia Boulevard, Suite D, San Diego, California 92173. Products must be shipped in the original shipping container or

quate packing or shipping procedures, com- mercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appear- ance of cabinetry not directly attributable to defect in materials or workmanship, or ser- vice, repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced.

This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclu- sion may not apply to you.

FRANÇAIS

SPÉCIFICATIONS

Composantes:

2 x Tweeters à dôme Dynamic Balance de 1 po (25mm)

2 x Transducteurs Dynamic Balance de 6 1/2 po (165mm)

Réponse en fréquence effective: 40Hz - 26kHz

Limites -3dB:

50Hz - 25kHz

Séparation de fréquences Topologie:

Filtre passe-bas 2è ordre à 2kHz

Filtre passe-haut 2è ordre à 2Hz. Capaciteurs à pellicule mylar seulement.

Impédance Nominale:

compatible avec sorties de 8 ohm

Amplification recommandée: 20 - 250 WRMS

Efficacité (1M, 1 Watt):

90dB

Finis disponibles :

Noir ou placage de bois de rose

Dimensions:

11 1/4"l x 19 13/16"h x 9 3/4"p

28.6cm l x 50.3cm h x 24.8cm p

DEUTSCH

SPEZIFIKATIONEN

Bestückung:

2 x 1" (25 mm) Dynamic Balance Dome Tweeter

2 x 6 1/2" (165 mm) Dynamic Balance Töner

Frequenzgang über alles: 40Hz – 26 kHz

Frequenzgang – 3 dB:

50 Hz – 25 kHz

Topologie/Spezifikationen Frequenzweiche:

Mittel-/Hochtonmodul:

Tiefpassfilter 2. Ordnung 2kHz;

Hochpassfilter 2. Ordnung 2 kHz. Mylar Kondensatoren durchgängig verwendet

Nenn-Impedanz:

kompatibel mit 8 Ohm Ausgang.

Empfohlene Verstärkerleistung:

20 – 250 Watt pro Kanal

Empfindlichkeit (1 M, 1 Watt):

90 dB

Gehäuseoberflächen:

schwarz oder Rosenholz Echtholzfurnier

Gehäuseabmessungen:

H x B x T: 28,6 x 50,3 x 24,8 cm

its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or work- manship at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within a reasonable time, freight prepaid.

This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inade-

All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.

This Warranty applies only to Products pur- chased in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs. The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio Authorized Distributors in such countries.

incluant l’épaisseur des supports muraux

Poids:

55 lb / 25 kg

einschließlich Wandbefestigungsklammern

Gewicht incl. Verpackung: 25 kg

“Polk Audio”, “Polk”, and “Dynamic Balance” are trademarks of Britannia Investment Corporation used under license by

Polk Audio Incorporated.

Dolby, Pro Logic, Dolby Digital and AC-3 are trademarks of Dolby Laboratories Licensing Corp.

DTS is a registered trademark of Digital Theater Systems.

26

For more infor mation visit our web site at http://www. polkaudio . com 27

Image 14
Contents Series Français EnglishEspañol DeutschRT5000 Complete Home Theater Package Option Dipole Français Deutsch Location SoundX1000 left ’INSTALLATION Murale Sécuritaire Requiert Deux Personnes ONE Screw Location on Each Bracket for Secure Mounting English Español X1000 rightAmplifier Power Requirements BI-AMPLIFICATION and BI-WIRING Dolby Digital AC-3 Settings Safe Limits of Operation Unseren Kundenservice erreichen Sie unter der Rufnummer English Español Polk Audio Limited Warranty Specifications Especificaciones

f/x1000 specifications

Polk Audio has long been a trusted name in the world of audio equipment, and their F/X1000 surround speakers are no exception. Designed for those who seek an immersive home theater experience, these compact speakers pack a punch with advanced technology and high-quality sound reproduction.

At first glance, the F/X1000 speakers showcase a sleek, modern design that can seamlessly blend into any decor. Their versatility allows them to be wall-mounted or used as part of a bookshelf setup, making them suitable for various room configurations. The speakers feature a sophisticated curved enclosure that not only enhances their aesthetic appeal but also minimizes distortion for clearer sound output.

One of the standout features of the F/X1000 is its unique intergraded multi-directional design. The speakers are engineered with a dual tweeter array and a high-efficiency woofer that enables them to project sound in multiple directions. This design creates an enveloping soundstage, making it feel as though you are fully immersed in the action on-screen. This multi-dimensional sound capability enhances the surround sound experience, allowing users to hear every detail, from the softest whispers to the loudest explosions.

The F/X1000 is equipped with Polk's proprietary Dynamic Balance technology, which optimizes the speaker’s performance by minimizing distortion and improving overall clarity. This technology ensures that both music and movie soundtracks are rendered with precision, delivering an authentic listening experience.

Furthermore, the F/X1000 speakers have been crafted using high-quality materials and rigorous engineering processes, ensuring durability and long-lasting performance. The use of durable drivers and components means that the speakers can handle high volumes without compromising sound quality.

In terms of compatibility, the F/X1000 is suitable for a wide range of home theater systems and can be easily integrated within existing setups. Whether paired with a dedicated subwoofer or used as part of a full surround sound system, these speakers are designed to elevate your audio experience.

In summary, the Polk Audio F/X1000 surround speakers stand out for their exceptional design, innovative technologies, and immersive sound performance. With features like multi-directional sound projection and Dynamic Balance technology, they are ideal for audiophiles and casual listeners alike. If you're seeking to enhance your home theater with impactful sound and modern aesthetics, the F/X1000 should be at the top of your list.