Pioneer KEH-P6011R operation manual Setting the Rear Output FRT+REAR

Initial Setting

Setting the Rear Output (FRT+REAR)

This product’s rear output (rear speaker leads output and RCA Rear output) can be used for full-range speaker (“FRT+REAR”) or Subwoofer (“FRT+S/W”) connection. If you switch Rear Output setting to the “FRT+S/W”, you can connect a rear speaker lead directly to a Subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speaker connection (“FRT+REAR”).

Note:

•Even if you change this setting, there is no output unless you switch the Subwoofer Output (refer to page 41) in the Audio Menu ON.

•Both rear speaker leads output and RCA Rear output are switched simultaneously in this setting mode.

1.Press the FUNCTION button and select the Rear Output setting mode (FRT+REAR) in the Initial Setting Menu.

2.Change the Rear Output set-

ting with the 5/° buttons.

Note:

•When no Subwoofer is connected to the rear output, select “FRT+REAR”.

•When a Subwoofer is connected to the rear output, set for Subwoofer “FRT+S/W”.

47