Toshiba VF-AS1 E6581315 „ Monitor parameters, Trip data held Function Unit Remarks Value, FE25

efesotomasyon.com -Toshiba inverter,drive,servo,plc

E6581315

„ Monitor parameters		*These Parameters are read-only (monitor-only) parameters.
	Communication No.
	Current	Trip data held	Function	Unit	Remarks
	value
	FC00	－	Monitor of key data (Effective	－	Refer to Section
			data)
					8.3.
	FC01	－	Monitor of inverter keypad data	－
	FC90	－	Trip code	－
	FC91	－	Alarm code	－	Refer to Section
	FD00	FE00	Output frequency	0.01Hz	8.2.
	FD01	FE01	Inverter status 1	－
	FD02	FE02	Frequency command value	0.01Hz
	FD03	FE03	Output current	0.01%
	FD04	FE04	Input voltage (DC detection)	0.01%
	FD05	FE05	Output voltage	0.01%
	FD06	FE06	Input terminal information	－	Refer to Section
	FD07	FE07	Output terminal information	－	8.2.
	－	FE08	CPU version 1 (application)	－
	－	FE10	Past trip 1 (latest)	－
	－	FE11	Past trip 2	－	Refer to Section
	－	FE12	Past trip 3	－	8.2.
	－	FE13	Past trip 4 (earliest)	－
	－	FE14	Cumulative operation time	1h
	FD15	FE15	Compensated frequency	0.01Hz
	FD16	FE16	Speed feedback (real time)	0.01Hz
	FD17	FE17	Speed feedback (1-sec. filter)	0.01Hz
	FD18	FE18	Torque	0.01%
	FD19	FE19	Torque command	0.01%
	FD20	FE20	Torque current	0.01%
	FD21	FE21	Exciting current	0.01%
	FD22	FE22	PID feedback value	0.01Hz
	FD23	FE23	Motor overload factor (OL2 data)	0.01%
	FD24	FE24	Inverter overload factor (OL1	0.01%
			data)
	FD25	FE25	Regenerative braking resistance	1%
			overload factor (OLr data)
	FD26	FE26	Motor load factor	1%
	FD27	FE27	Inverter load factor	1%
	FD28	FE28	Regenerative braking resistance	1%
			load factor
	FD29	FE29	Input power	0.01kW
	FD30	FE30	Output power	0.01kW
	－	FE35	RR/S4 input	0.01%
	－	FE36	VI/II input	0.01%	Refer to Section
	－	FE37	RX input	0.01%
					8.2.
	－	FE38	Option AI1	0.01%
	－	FE39	Option AI2	0.01%
	FD42	FE42	Inverter status 2	－	Refer to Section
					8.2.
	－	FE43	MON1 output (analog option 1)	－
	－	FE44	MON2 output (analog option 2)	－
	FD45	FE45	Command mode status	－	Refer to Section
	FD46	FE46	Frequency setting mode status	－	8.2.
	FD48	FE48	PID command	0.01Hz
	FD49	FE49	Inverter status 3	－	Refer to Section
					8.2.

65