Toshiba TOSVERT VF-AS1 instruction manual Modbus-Rtu

efesotomasyon.com -Toshiba inverter,drive,servo,plc

							E6581315
Com-
munica-	Title	Function	Adjustment range	Unit	Default	Valid	Reference
tion					setting
Number.
			0:Slave (issues a 0Hz command if some-
			thing goes wrong with the master)
			1:Slave (continues operation if something
		Inverter-to-inverter	goes wrong with the master)
			2:Slave (trips for emergency stop if
0826		communication	something goes wrong with the master)	-	0	After reset.	Chapter 6
		setting (4-wire
		RS485)	3:Master (sends a frequency command)
			4:Master (sends an output frequency)
			5.Master (sends a torque command)
			6.Master (sends an output torque com-
			mand)
0829		Protocol selection	0: TOSHIBA	-	0	After reset.	Chapter 3
		(4-wire RS485)	1: MODBUS-RTU
0870		Block write data 1	0: Deselect
			1: Command information 1 (FA00)
			2: Command information 2 (FA20)
			3: Frequency command (FA01)	-	0	After reset.	Section
0871		Block write data 2	4: Terminal board output data				4.1.3
			(FA50)
			5: Communication analog data
			(FA51)
0875		Block read data 1	0: Deselect
			1: Status information (FD01)
0876		Block read data 2
			2: Output frequency (FD00)
			3: Output current (FD03)
0877		Block read data 3
			4: Output voltage (FD05)
0878		Block read data 4	5: Alarm information (FC91)
			6: PID feedback value (FD22)
			7: Input terminal board monitor (FD06)
			8: Output terminal board monitor (FD07)
			9: VI/IIterminal board monitor (FE36)	-	0	After reset.	Section
			10: RR/S4 terminal board monitor (FE35)				4.1.3
			11:RX terminal board monitor (FE37)
0879		Block read data 5	12:Input voltage (DC detection) (FD04)
			13:Speed feedback frequency (FD16)
			14:Torque (FD18)
			15:MY monitor 1 (FE60)
			16:MY monitor 2 (FE61)
			17:MY monitor 3 (FE62)
			18:MY monitor 4 (FE63)
			19:Free notes (F880)
0880		Free notes	0-65535	1	0	Real time	Section 7.5

41