E6581315
63
Command parameters
For those parameters that contain data only in the RAM and not in the EEPROM, their data return to
initial values when the power is turned off, in failure resetting, or when standard shipment settings
are set. Note that parameters without data storage in the EEPROMs will be written in the RAM only
even if the command W (writing in EEPROMs and RAM) is executed.
Q　Commands 　　　　　　　　　　　　　　　　　　　　　　　　　NOTE : Data is expressed in decimal notation.
C
ommunica
-
tion
Num-
ber.(HEX)
Function Adjustment Range Min.
Setting
Unit
Initial
Value
Write
During
O
pe
r
atio
n
EEP
ROM
FA00 Command 1 (2-wire RS485) 10 to 65535 0yesNone
FA01 Frequency command value (2-
wire RS485) 10 to Max. frequency
()
0.01Hz 0 yes None
FA03 Operation panel operation
frequency *2Low-limit frequency
() to High-limit
frequency ()
0.01Hz 0 yes Available
FA04 Command 1 (4-wire RS485) 10 to 65535 0yesNone
FA05 Frequency command value (4-
wire RS485) 10 to Max. frequency
()
0.01Hz 0 yes None
FA10 Panel key selection 40: Main unit
1: Comunication
0yesNone
FA11 External communication key
data 40 to 65535 0yesNone
FA20 Command 2 (2-wire RS485) 10 to 65535 0yesNone
FA22 Command 2 (4-wire RS485) 10 to 65535 0yesNone
FA30 Torque command value (2-wire
RS485)
-250.00 to 250.00 0.01% 0 yes None
FA32 Torque command value (4-wire
RS485)
-250.00 to 250.00 0.01% 0 yes None
FA50 Terminal output data 30 to 255 1 0 yes None
FA51 FM analog output data 30 to 2047
(11-bit resolution)
10yesNone
FA52 AM analog output data 30 to 2047
(11-bit resolution)
10yesNone
FA53 MON1 analog output data 30 to 2047
(11-bit resolution)
10yesNone
FA54 MON2 analog output data 30 to 2047
(11-bit resolution)
10yesNone
FA65 Select display by communica-
tion 40 to 2 1 yes Available
FA66 Numerical display data 40-9999 1 0 yes Available
FA67 Decimal point position 40 to 2 0 yes Available
FA68 LED data for unit 0 40 to 3 0 yes Available
FA70 ASCII display data 1
First digit from left 40 to 127 100
(‘d’)
yes Available
FA71 ASCII display data 1
Second digit from left 40 to 255 65
(‘A’)
yes Available
FA72 ASCII display data 1
Third digit from left 40 to 255 116
(‘t’)
yes Available
FA73 ASCII display data 1
Fourth digit from left 40 to 127 65
(‘A’)
yes Available
FA74 LED data for unit1 40 to 3 0 yes Available
FA75 ASCII display data 2
First digit from left 40 to 127 48
(‘0’)
yes Available
FA76 ASCII display data 2
Second digit from left 40 to 255 48
(‘0’)
yes Available
FA77 ASCII display data 2
Third digit from left 40 to 255 48
(‘0’)
yes Available
FA78 ASCII display data 2
Fourth digit from left 40 to 127 48
(‘0’)
yes Available
FA79 LED data for unit 2 40 to 3 0 yes Available
FA80 Block communication mode 40 to 1 0 yes Available
efesotomasyon.com -Toshiba inverter,drive,servo,plc