Problem | Things to Try | |
I can transmit, but no | Check your UIC channel settings: | |
does the area you are in use different | ||
one can hear me. | ||
channel assignments? | ||
| ||
I’m not getting hazard | Make sure Weather Alert Watch is | |
alerts. | turned on. | |
| The channel number on the display | |
The display flashes, | will flash if the radio is in a watch | |
mode or in scan mode. Try turning off | ||
and I don’t know why. | ||
scanning, Weather Alert Watch, Triple | ||
| ||
| Watch, or Dual Watch (see page | |
Where can I find my | The serial number is on a plate inside | |
radio’s serial number? | the battery compartment. |
Specifications
General
Channels | All US/International/Canada marine | |
channels | ||
| ||
| 10 Weather channels | |
Freq. Control | PLL | |
Freq. Tol. | Transmit: 1.5 PPM (at 25°C) | |
| Receive: 1.5 PPM (at 25°C) | |
Oper. Temp. | ||
Antenna | Flexible Whip | |
Microphone | ||
Display | Liquid Crystal Display | |
Speaker | 8Ω 0.5 Watt | |
Power Source | Rechargeable Lithium Ion Battery | |
7.4V 1040 mAh | ||
| ||
Size (without antenna) | 5.95 (H) x 2.56 (W) x 1.77 (D) inch | |
| 151 (H) x 65 (W) x 45 (D) mm | |
Weight | 11.29 oz (320g) (w/battery and | |
antenna) | ||
|
Uniden MHS125 Radio Owner’s Manual |