2. Lower the battery until it rests flat in the compartment.
3. Bring the battery latch up and snap it into place.
Using the Alkaline
Battery Case
The radio also comes with a battery case that holds four
NOTE: When using alkaline batteries, transmit power is limited to a maximum of 2.5W.
Follow these steps to use the alkaline battery case:
1.Hold the lower part of the case in one hand with the three battery contacts facing down. Use your thumb to hold the
notch on the lower part of the case.
2. With your other hand, grip the upper part of the case and lift the cover open.
3. Align the batteries’ positive and negative terminals with the drawing on the case and snap each battery into place.
4. Insert the two hooks on the lower part of the case into the notches on the cover; close the cover.
(The cover fits snugly but you should not have to force it closed.)
Uniden MHS125 Radio Owner’s Manual |